Related papers: Asynchronous accelerator with RFQ injection for ac…
ARES (Accelerator Research Experiment at SINBAD) is a linear accelerator at the SINBAD (Short INnovative Bunches and Accelerators at DESY) facility at DESY. ARES was designed to combine reproducible beams from conventional RF-based…
LINAC 4 is a normal conducting H- linac proposed at CERN to provide a higher proton flux to the CERN accelerator chain. It should replace the existing LINAC 2 as injector to the Proton Synchrotron Booster and can also operate in the future…
This paper describes the utilization of beam-driven plasma wakefield acceleration to implement a high-quality plasma cathode via density-downramp injection in a short injector stage at the FLASHForward facility at DESY. Electron beams with…
Generation of ultrashort X-ray pulses in a free-electron laser relies on high-density electron bunches with a precisely adjusted current and energy distribution. To this end, robust and flexible electron bunch manipulation techniques are…
Using the China Spallation Neutron Source (CSNS) linac as the injector, a 500 MeV proton synchrotron is proposed for multidisciplinary application, such as biology, material and proton therapy. The synchrotron will deliver proton beam with…
A new electron acceleration mechanism is identified that develops when a relativistically intense laser irradiates the wedge of an over-dense plasma. This induces a diffracted electromagnetic wave with a significant longitudinal electric…
The ARES linac at DESY aims to generate and characterize ultrashort electron bunches (fs to sub-fs duration) with high momentum and arrival time stability for the purpose of applications related to accelerator R&D, e.g. development of…
The 75-keV injector and 6.7-MeV RFQ that comprise the first portion of the cw, 100-mA proton linac for the accelerator production of tritium (APT) project have been built and operated. The LEDA RFQ has been extensively tested for pulsed and…
This lecture is a brief introduction to charged particle accelerators. The aim is to provide the reader with basic concepts and tools needed to describe the motion of charged particles under the action of guiding and focussing fields, with…
Linear Induction Accelerator (LIA) is a unique type of accelerator, which is capable to accelerate kiloAmpere charged particle current to tens of MeV energy. The present development of LIA in MHz busting mode and successful application into…
The proposed linear accelerator ("scanator") consists of a terawatt table-top laser and a set of passive elements - beam splitters, dispersion elements for stretching of the laser pulse and chirping of the splitted beams, and dispersion…
In this paper, a novel concept combining a fixed field alternating gradient accelerator with time-varying quadrupoles is presented which solves some of the major problems of conventional fixed field accelerators. This concept combines a…
As the second stage of the CEPC-SPPC project, SPPC (Super Proton-Proton Collider) aims at exploring new physics beyond the Standard Model. The key design goal for the SPPC accelerator complex is to reach 75 TeV in center of mass energy with…
Asymmetrical Alternate Phase (A-APF) focusing realized in a sequence of 36 Superconducting Quarter Wave Resonators has been shown to accelerate almost 81 % of input Uranium beam before foil stripper to an energy of 6.2 MeV/u from 1.3 MeV/u.…
The FLASHForward experimental facility is a high-performance test-bed for precision plasma-wakefield research, aiming to accelerate high-quality electron beams to GeV-levels in a few centimetres of ionised gas. The plasma is created by…
KAERI (Korea Atomic Energy Research Institute) has been performing the project named KOMAC (Korea Multi-purpose Accelerator Complex) within the frame work of national mid and long term nuclear research plan. The final objectives of KOMAC is…
Attosecond electron beams are essential for investigating ultrafast structural and electronic dynamics in matter with atomic-scale resolution. We propose a novel method that enables robust attosecond-level electron bunch compression. This…
Bunch splitting is an RF manipulation method of changing the bunch structure, bunch numbers and bunch intensity in the high-intensity synchrotrons that serve as the injector for a particle collider. An efficient way to realize bunch…
High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in…
The Coupled Cavity Drift Tube Linac (CCDTL) used in the Accelerator for the Production of Tritium (APT) is fully described elsewhere [1]. The modules are composed of several machined and brazed segments that must account for the…