Related papers: Ignition and Front Propagation in Polymer Electrol…
A PEM fuel cell was specially constructed to determine kinetics under conditions of well-defined gas phase composition and cell temperature. Steady state multiplicity was discovered in the autohumidification PEM fuel cell, resulting from a…
The design and operation of a differential Polymer Electrolyte Membrane (PEM) fuel cell is described. The fuel cell design is based on coupled Stirred Tank Reactors (STR); the gas phase in each reactor compartment was well mixed. The…
We present a macrohomogeneous two-phase model of a proton exchange membrane fuel cell (PEMFC). The model takes into account the mechanical compression of the gas diffusion layer (GDL), the two-phase flow of water, the transport of the gas…
An analytical model of mechanical stress in a polymer electrolyte membrane (PEM) of a hydrogen/air fuel cell with porous Water Transfer Plates (WTP) is developed in this work. The model considers a mechanical stress in the membrane is a…
Five parameters of a model of a polymer electrolyte membrane fuel cell cathode (the porosity of the gas diffusion layer, the porosity of the catalyst layer, the exchange current density of the oxygen reduction reaction, the effective ionic…
A model of PEM fuel cell impedance is developed taking into account imposed harmonic perturbation of the air flow velocity in the cathode channel. The flow velocity modulation with the amplitude proportional to AC amplitude of the cell…
Evolution of fuel droplet evaporation zone and its interaction with the propagating flame front are studied in this work. A general theory is developed to describe the evolutions of flame propagation speed, flame temperature, droplet…
Fluid, heat and species transport and oxygen reduction in the cathode of a PEM fuel cell are simulated using multi relaxation lattice Boltzmann method. Heat generation due to oxygen reduction and its effects on transport and reaction are…
In this paper we formulate and analyze an elementary model for the propagation of advancing autoignition fronts in reactive co-flow fuel/oxidizer jets injected into an aqueous environment at high pressure. This work is motivated by the…
Effective water management is essential for the optimal performance of PEM fuel cells. We have developed an impedance model for liquid water transport through the membrane and coupled it with the two-phase model for cathode side impedance.…
A simplified differential reactor model that embodies the essential physics controlling PEM fuel cell (PEM-FC) dynamics is presented. A remarkable analogy exists between water management in the differential PEM-FC and energy balance in the…
An experimental study of methane, propane and dimethyl ether (DME) pre-mixed flames propagating in a quasi-two-dimensional Hele-Shaw cell placed horizontally is presented in this paper. The flames are ignited at the open end of the…
In this paper, we discuss critical aspects of the mechanisms and features of polymer proton exchange membrane (PEM) degradation in low-temperature H2/O2 fuel cell. In this paper, we focused on chemical mechanism of OH radical generation and…
Water management in a hydrogen polymer electrolyte membrane (PEM) fuel cell is critical for performance. The impact of thermal conductivity and water vapor diffusion coefficients in a gas diffusion layer (GDL) has been studied by a…
The problem of premixed flame propagation in wide horizontal tubes is revisited. Employing the on-shell description of flames with arbitrary gas expansion, a nonlinear second-order differential equation for the front position of steady…
Proton Exchange Membrane Fuel Cell (PEMFC) is widely recognized for its cleanliness and high efficiency, but is still facing challenges in cold environments. At low temperatures, the formation of ice and repeated freezing/thawing cycles may…
Frontal polymerization (FP) enables rapid curing of thermosets via a self-sustaining thermal wave, but its propagation mechanism can shift dramatically depending on processing conditions. In this study, we investigate the effect of trigger…
The global transition to hydrogen-based energy infrastructures faces significant hurdles. Chief among these are the high costs and sustainability issues associated with acid-based proton exchange membrane fuel cells. Anion exchange membrane…
The present work investigates forced ignition and oscillating propagation of spray flame in a mixture of fine ethanol droplets and air. Eulerian-Eulerian method with two-way coupling is used and detailed chemical mechanism is considered.…
Numerical modeling of proton exchange membrane fuel cells is at the verge of becoming predictive. A crucial requisite for this, though, is that material properties of the membrane-electrode assembly and their functional dependence on the…