Related papers: The HERMES Back Drift Chambers
2D and 4D transverse phase-space of a low-energy ion-beam is measured with two of the most common emittance scanners. The article covers the description of the installation, the setup, the settings, the experiment and the benchmark of the…
The primary purpose of the Fermilab Recycler Ring Transverse Digital Damper System is to prevent instabilities due to high phase space densities of the cooled antiproton beam. The system was designed to facilitate Beam Transfer Function…
HERMES is a scientific mission composed of 3U nano-satellites dedicated to the detection and localization of high-energy astrophysical transients, with a distributed space architecture to form a constellation in Earth orbits. The space…
Micro-Electro-Mechanical Systems (MEMS) normally have fixed or moving structures with cross-sections of the order of microns ($\mu m$) and lengths of the order of tens or hundreds of microns. These structures are often plates or array of…
Small-diameter muon drift tube (sMDT) detectors have been developed for upgrades of the ATLAS muon spectrometer. With a tube diameter of 15 mm, they provide an about an order of magnitude higher rate capability than the present ATLAS muon…
The Alpha Magnetic Spectrometer (AMS) is a precision particle physics detector operating at an altitude of 410 km aboard the International Space Station. The AMS silicon tracker, together with the permanent magnet, measures the rigidity…
Gas electron multipliers (GEMs) with wire (WGEMs) or metal electrodes (MGEMs), which don't use any plastic insulators between the electrodes are created. The absence of plastic insulation between the electrodes of WGEMs excludes unwanted…
We analyze the behavior of a non-Hermitian opened one-dimensional quantum system with $\mathcal{PT}$ symmetry. This system is built by a dimer, with balanced gains and losses described by a parameter $\gamma$. By varying $\gamma$ the system…
A multi-dimensional (x, y, z, P_{h\perp}) extraction of cos\phi_h and cos2\phi_h azimuthal asymmetries of unpolarized Semi-Inclusive Deep Inelastic Scattering at HERMES is discussed. The use of data taken with hydrogen and deuterium targets…
We have operated a liquid-argon large-electron-multiplier time-projection chamber (LAr LEM-TPC) with a large active area of 76 $\times$ 40 cm$^2$ and a drift length of 60 cm. This setup represents the largest chamber ever achieved with this…
The high-luminosity phase of the Large Hadron Collider (HL-LHC) will result in ten times higher particle background than measured during the first phase of LHC operation. In order to fully exploit the highly-demanding operating conditions…
A Time Projection Chamber (TPC) using micro-pattern gas detectors is planned as the main tracking device for a detector at the next Linear Collider. A novel support structure for Gas Electron Multipliers (GEMs), which minimizes the material…
Reverberation chambers are currently used to test electromagnetic compatibility as well as to characterize antenna efficiency, wireless devices, and MIMO systems. The related measurements are based on statistical averages and their…
The HERMES-TP/SP (High Energy Rapid Modular Ensemble of Satellites -- Technologic and Scientific Pathfinder) is an in-orbit demonstration of the so-called distributed astronomy concept. Conceived as a mini-constellation of six 3U…
Details of the design, fabrication, ground and flight calibration of the High Energy Transmission Grating, HETG, on the Chandra X-ray Observatory are presented after five years of flight experience. Specifics include the theory of phased…
The detection of photons produced during the avalanche development in gas chambers has been the subject of detailed studies in the past. The great progresses achieved in last years in the performance of micro-pattern gas detectors on one…
Measurements and numerical simulations on the charge transfer in Gas Electron Multiplier (GEM) foils are presented and their implications for the usage of GEM foils in Time Projection Chambers are discussed. A small test chamber has been…
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive…
Data taking for Run II of the HERMES experiment will start in late 2001 with three main physics objectives for the next 4-5 years: a measurement of transversity distributions, an improved measurement of helicity distributions, and…
A large Time Projection Chamber is proposed as part of the tracking system for a detector at the TESLA electron positron linear collider. Different ongoing R&D studies are reviewed, stressing progress made on a new type readout technique…