Related papers: The photothermal effect in interferometers
We report optical enhancement in polarization and dielectric constant near room temperature in Pb0.6Li0.2Bi0.2Zr0.2Ti0.8O3 (PLBZT) electro-ceramics; these are doubly substituted members of the most important commercial ferroelectric…
We present a one-dimensional scattering theory which enables us to describe a wealth of effects arising from the coupling of the motional degree of freedom of scatterers to the electromagnetic field. Multiple scattering to all orders is…
Through the study of the power spectra of a monochromatic light beam reflected by metallic mirrors, fluctuations in their reflectance is observed. The power spectra were obtained down to a factor $10^{-6}$ below the Standard Quantum Limit,…
Two optical fiber Mach-Zehnder interferometers were constructed in an environment with a temperature stabilization of better than 1 mK per day. One interferometer with a length of 12 m optical fiber in each arm with the main direction of…
Fiber Fabry--Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 10^9, with an optimum of…
Factors that contribute to the temperature dependence of a resonant frequency in a low-expansion optical cavity are discussed, including deformation at the cavity ends due to different coefficients of thermal expansion (CTE) of the spacer,…
This paper is devoted to the study of photothermal transformations in multilayered structures. As a modelled sample, porous silicon with a periodic distribution of the porosity was chosen. The spatial distribution of the optical properties…
Measurements of the deflection induced by thermal noise have been performed on a rectangular atomic force microscope cantilever in air. The detection method, based on polarization interferometry, can achieve a resolution of 1E-14 m/rtHz in…
We propose a method for thermal expansion compensation of reference monolithic optical cavities for laser frequency stabilization. Two schemes of optical cavities are considered: a Fabry-Perot interferometer with a crimp ring and a…
We propose a method for measuring the temperature of fermionic atoms in an optical lattice potential from the intensity of the scattered light in the far-field diffraction pattern. We consider a single-component gas in a tightly-confined…
The influence has been studied of the ionization laser polarization on the effective temperature of an ultracold electron source, which is based on near-threshold photoionization. This source is capable of producing both high-intensity and…
We calculate the thermal noise in half-infinite mirrors containing a layer of arbitrary thickness and depth made of excessively lossy material but with the same elastic material properties as the substrate. For the special case of a thin…
Using spontaneous parametric down conversion and a 50:50 beam splitter, we generate coaxial polarization-entangled photon pairs, of which the two photons are far separated from each other. The photons are then sent one by one through one…
In second-generation, ground-based interferometric gravitational-wave detectors such as Advanced LIGO, the dominant noise at frequencies $f \sim 40$ Hz to $\sim 200$ Hz is expected to be due to thermal fluctuations in the mirrors'…
We report on detailed in-situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the TMI-threshold of a commercial LMA fiber with 25 micron core and 400 micron cladding was measured at…
We present an approximate analysis of a nonlinear effect of parametric oscillatory instability in FP interferometer. The basis for this effect is the excitation of the additional (Stokes) optical mode and of the mirror's elastic mode when…
Imaging both the polarization and the wavefront of a light beam is a complex task that typically demands several intensity acquisitions. Furthermore, sequential acquisition solutions are incompatible with the monitoring of ultra-fast…
We review the theory of the Casimir effect using scattering techniques. After years of theoretical efforts, this formalism is now largely mastered so that the accuracy of theory-experiment comparisons is determined by the level of precision…
Photons preferentially Compton scatter perpendicular to the plane of polarisation. This property can be exploited to design instruments to measure the linear polarisation of hard X-rays ($\sim$10 - 100 keV). Photons may undergo two…
We report the results of a recent search for the lowest value of thermal noise that can be achieved in LIGO by changing the shape of mirrors, while fixing the mirror radius and maintaining a low diffractional loss. The result of this…