Related papers: On The Tradeoff Between Two Types of Processing Ga…
Reliable communication is a challenge in a very noisy RF channel further corrupted by severe, multiple narrowband interference. Code Division Multiple Access (CDMA) is a widely used method to both mitigate such interference and support…
Resonant beam charging (RBC) can realize wireless power transfer (WPT) from a transmitter to multiple receivers via resonant beams. The adaptive RBC (ARBC) can effectively improve its energy utilization. In order to support multi-user WPT…
In order to manage the increasing interference between radar and communication systems, joint radar and communication (RadCom) systems have attracted increased attention in recent years, with the studies so far considering the assumption of…
The fundamental diversity-multiplexing tradeoff (DMT) of the quasi-static fading, symmetric $2$-user MIMO interference channel (IC) with channel state information at the transmitters (CSIT) and a short term average power constraint is…
Near-field integrated sensing and communication (ISAC) leverages distance-dependent channel variations for joint distance and angle estimation. However, full-digital architectures have prohibitive hardware costs, making hybrid…
A $K$-user pseudo-orthogonal (PO) randomly spread CDMA system, equivalent to transmission over a subset of $K'\leq K$ single-user Gaussian channels, is introduced. The high signal-to-noise ratio performance of the PO-CDMA is analyzed by…
We present the modeling and characterization of a time-reversal routing dispersion code multiple access (TR-DCMA) system. We show that this system maintains the low complexity advantage of DCMA transceivers while offering dynamic adaptivity…
In this paper, we study the optimal design for simultaneous wireless information and power transfer (SWIPT) in downlink multiuser orthogonal frequency division multiplexing (OFDM) systems. For information transmission, we consider two types…
In a large-scale wireless ad hoc network in which all transmitters form a homogeneous of Poisson point process, the statistics of the signal-to-interference ratio (SIR) in prior work is only derived in closed-form for the case of Rayleigh…
Rate-splitting multiple access (RSMA) has emerged as a novel, general, and powerful framework for the design and optimization of non-orthogonal transmission, multiple access (MA), and interference management strategies for future wireless…
Rate-Splitting Multiple Access (RSMA) is a powerful and versatile physical layer multiple access technique that generalizes and has better interference management capabilities than 5G-based Space Division Multiple Access (SDMA). It is also…
Impulse-Radio (IR) is a wideband modulation technique that can support multiple users by employing random Time-Hopping (TH) combined with repeated transmissions. The latter is aimed at alleviating the impact of collisions. This work employs…
In this correspondence, we investigate an intelligent reflective surface (IRS) assisted downlink ultra-reliable and low-latency communication (URLLC) system, where an access point (AP) sends short packets to multiple devices with the help…
A communication setup is considered where a transmitter wishes to simultaneously sense its channel state and convey a message to a receiver. The state is estimated at the transmitter by means of generalized feedback, i.e. a strictly causal…
Rate-Splitting Multiple Access (RSMA) is an emerging flexible, robust and powerful multiple access scheme for downlink multi-antenna wireless networks. RSMA relies on multi-antenna Rate-Splitting (RS) strategies at the transmitter and…
Rate Splitting Multiple Access (RSMA) has recently emerged as a promising technique to enhance the transmission rate for multiple access networks. Unlike conventional multiple access schemes, RSMA requires splitting and transmitting…
Code division multiplexing (CDM)-based random access is used in many practical wireless systems. With CDM-based random access, a set of sequences is reserved for random access. A remote station transmits a random access packet using a…
This paper studies an integrated sensing and communication (ISAC) system where a multi-antenna base station (BS) aims to communicate with a single-antenna user in the downlink and sense the unknown and random angle parameter of a target via…
This paper is concerned with the fading MIMO-MAC with multiple receive antennas at the base station (BS) and multiple transmit antennas at each mobile terminal (MT). Two multiple-access techniques are considered for scheduling transmissions…
In the near future, it is envisioned that cellular networks will have to cope with extensive Internet of Things (IoT) devices. Therefore, a required feature of cellular IoT will be the capability to serve simultaneously a large number of…