Related papers: Two stage superconducting quantum interference dev…
Superconducting quantum interference devices (SQUIDs) and related circuits made of aluminum are known to display $1/\omega$ flux noise, where $\omega$ is frequency. A recent experiment showed that the application of an external magnetic…
There is currently fundamental and technological interest in measuring and manipulating nanoscale magnets, particularly in the quantum coherent regime. To observe the dynamics of such systems one requires a magnetometer with not only…
We have developed and measured a high-gain quantum-limited microwave parametric amplifier based on a superconducting lumped LC resonator with the inductor L including an array of 8 superconducting quantum interference devices (SQUIDs). This…
Scanning Superconducting QUantum Interference Device (SQUID) microscopy is a powerful tool for imaging local magnetic properties of materials and devices, but it requires a low-vibration cryogenic environment, traditionally achieved by…
We report on the fabrication and characterization of microSQUID devices based on nanoscale vanadium/copper/vanadium Josephson weak links. Magnetically driven quantum interference patterns have been measured for temperatures in the 0.24 - 2…
The magnetic field noise in superconducting quantum interference devices (SQUIDs) used for biomagnetic research such as magnetoencephalography or ultra-low-field nuclear magnetic resonance is usually limited by instrumental dewar noise. We…
We present measurements of the temperature and power dependence of the resonance frequency and frequency noise of superconducting niobium thin-film coplanar waveguide resonators, carried out at temperatures well below the superconducting…
We report on the fabrication and electrical transport properties of gate-tunable superconducting quantum interference devices (SQUIDs), made of semiconducting PbS nanowire contacted with PbIn superconducting electrodes. Applied with a…
Cobalt disilicide provides a promising nearly-epitaxial superconducting material on silicon, which is compatible with high-density integrated circuit technology. We have characterized CoSi$_{2}$ superconducting microwave cavities around 5.5…
The current noise density S of a conductor in equilibrium, the Johnson noise, is determined by its temperature T: S=4kTG with G the conductance. The sample's noise temperature Tn=S/(4kG) generalizes T for a system out of equilibrium. We…
The high-frequency transconductance and current noise of top-gated single carbon nanotube transistors have been measured and used to investigate hot electron effects in one-dimensional transistors. Results are in good agreement with a…
The origin of magnetic flux noise in Superconducting Quantum Interference Devices with a power spectrum scaling as $1/f$ ($f$ is frequency) has been a puzzle for over 20 years. This noise limits the decoherence time of superconducting…
We introduce a superconducting transconductance amplifier based on the thermal modulation of a SINIS (Superconductor-Insulator-Normal metal-Insulator-Superconductor) configuration. The device is composed of a normal metal island interfaced…
Inductance plays a crucial role in the design and optimization of superconducting quantum interference devices (SQUIDs) for quantum sensing applications, since it dictates the sensitivity and coupling ratio with other circuit elements. In…
We report on the fabrication and electrical transport properties of superconducting quantum interference devices (SQUIDs) made from a (Bi_{1-x}Sb_x)_2Se_3 topological insulator (TI) nanoribbon (NR) connected with Pb0.5In0.5 superconducting…
We propose a single photon detector based on a superconducting quantum interference device (SQUID) with superconductor-normal metal-superconductor Josephson weak links. One of the two Josephson junctions is connected to an antenna, and is…
Thermal Kinetic Inductance Detectors (TKIDs) inherently combine the phonon-limited noise performance of traditional bolometers with the array scalability and responsivity of superconducting kinetic inductance detectors. Using a…
A superconducting flux qubit is inductively coupled to a Superconducting QUantum Interference Device (SQUID) magnetometer, capacitively shunted to form a 1.294-GHz resonator. The qubit-state-dependent resonator frequency is weakly probed…
We have prepared meta-atoms based on radio frequency superconducting quantum interference devices (RF SQUIDs) and examined their tunability with dc magnetic field, rf current, and temperature. RF SQUIDs are superconducting split ring…
We have fabricated arrays of High-T$_c$ Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive antennas for Radio-Frequency (RF) waves. These sub-wavelength size devices known as…