Related papers: Decrease of Ac Losses in High Tc Superconducting T…
Creating complex flux configurations by superposing a dc current or magnetic field onto the ac current in a type II superconducting tape should lead to a variety of peculiar behaviors. An example is the appearance of the Clem valley, a…
The current distribution and the AC loss in a composite superconducting tape containing a layer from magnetic material is calculated and compared with experiments, showing a very good agreement. The situations of an alternating uniform…
Coupling losses were studied in composite tapes containing superconducting material in the form of two separate stacks of densely packed filaments embedded in a metallic matrix of Ag or Ag alloy. This kind of sample geometry is quite…
We have fabricated prototype Bi,Pb(2223)/Ag superconduting multifilamentary wires with a square cross-section. The AC losses of these wires were measured, compared with those of tapes and also compared with the theory. Wires show largely…
Measurements of AC losses in a HTS-tape placed in between of two bulk magnetic shields of high permeability were performed by applying calorimetric techniques for various asymmetrical shielding arrangements. The experiment was supported by…
An increase in the critical current and suppression of AC losses in superconducting wires and tapes with soft magnetic sheath have been predicted theoretically and confirmed experimentally. In this work we present the results of…
Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…
Many applications, such as magnets and SMES, are usually charged and discharged under a bias DC current, which may increase the AC loss. For their design, it is necessary to understand and predict the AC loss. This article analises the AC…
With the recent progresses on the designing and manufacturing of lightweight and high engineering current density superconducting cables, the need for an established, fast, and sufficiently accurate computational model for the forecasting…
AC losses in High Temperature Superconductor tapes (HTS) are an important design parameter for large scale power applications. The electrical method is often used for losses measurements on SC tapes and, when the results are to be compared…
Many superconducting power applications contain REBCO coils. Superconducting motors are very interesting for mobile applications like aviation, thanks to their high power per unit weight. In order to reduce the inductance, multi-tape…
Minimization of ac losses is essential for economic operation of high-temperature superconductor (HTS) ac power cables. A favorable configuration for the phase conductor of such cables has two counter-wound layers of HTS tape-shaped wires…
Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…
We report significant transport critical currents firstly achieved in Sr0.6K0.4Fe2As2 wires and tapes with a Tc = 34 K, which were fabricated through an in-situ powder-in-tube process. Silver was used as a chemical addition as well as a…
In the last 10-15 years, the most common strategy in the development of High Temperature Superconducting (HTS) cable for magnets has been to imitate Low Temperature Superconducting (LTS) cable designs. However, requirements for LTS…
A finite stack of thin superconducting tapes, all carrying a fixed current I, can be approximated by an anisotropic superconducting bar with critical current density Jc=Ic/2aD, where Ic is the critical current of each tape, 2a is the tape…
We Study in this paper the scaling and statistical properties of the $ac$ conductivity of thin metal-dielectric films in different regions of the loss in the metallic components and particularly in the limit of vanishing loss. We model the…
Losses as function of the a.c. magnetic field amplitude ($B_0$) were measured at 77 K in untwisted BSCCO(2223)/Ag tapes, at different frequencies, by measuring the imaginary part of the a.c. susceptibility. In particular, loss measurements…
In this paper we develop a method based on the critical state for calculating the current and field distributions and the AC losses in a cable made of curved thin superconducting tapes. The method also includes the possibility of…
The optimization of a HTS cable design with respect to AC-losses is of crucial importance for the economic viability of the respective concept. However the experimental determination of AC-losses is not straightforward since for short cable…