Related papers: Ferromagnetic resonance force microscopy on micros…
We present Magnetic Resonance Force Microscopy (MRFM) measurements of Ferromagnetic Resonance (FMR) in a 50 nm thick permalloy film, tilted with respect to the direction of the external magnetic field. At small probe-sample distances the…
We report Ferromagnetic Resonance Force Microscopy (FMRFM) experiments on a justaposed continuous films of permalloy and cobalt. Our studies demonstrate the capability of FMRFM to perform local spectroscopy of different ferromagnetic…
To explore the further possibilities of nanometer-thick ferromagnetic films (ultrathin ferromagnetic films), we investigated the ferromagnetic resonance (FMR) of 1 nm-thick Co film. Whilst an FMR signal was not observed for the Co film…
Ferromagnetic Resonance Force Microscopy (FMRFM) offers a means of performing local ferromagnetic resonance. We have studied the evolution of the FMRFM force spectra in a continuous 50 nm thick permalloy film as a function of probe-film…
We present room temperature ferromagnetic resonance (FMR) studies of polycrystalline ||Pt/10 nm Cu/t Co/10 nm Cu/Pt|| films as a function of Co layer thickness (1 < t < 10 nm) grown by evaporation and magnetron sputtering. FMR was studied…
We review how a magnetic resonance force microscope (MRFM) can be applied to perform ferromagnetic resonance (FMR) spectroscopy of \emph{individual} sub-micron size samples. We restrict our attention to a thorough study of the spin-wave…
In this work we introduce a new method of a ferromagnetic resonance (FMR) detection from thin, nm-size, films. Our setup is based on the commercial piezo-cantilever, used for atomic force microscopy. It has an option to rotate the sample in…
The ferromagnetic resonance frequencies are obtained for a thin ferromagnetic film with surface anisotropy for the cases when the external magnetic field is applied perpendicularly or parallel to the film surface, and for various…
We report on room temperature ferromagnetic resonance (FMR) studies of [$t$ Co$|2t$ Ni]$\times$N sputtered films, where $0.1 \leq t \leq 0.6$ nm. Two series of films were investigated: films with same number of Co$|$Ni bilayer repeats…
Ferromagnetic resonance has been used to study the magnetic properties and magnetization dynamics of polycrystalline Fe$_{1-x}$V$_{x}$ alloy films with $0\leq x < 0.7$. Films were produced by co-sputtering from separate Fe and V targets,…
Magnetic force microscopy (MFM) allows detection of stray magnetic fields around magnetic materials and the two-dimensional visualization of these fields. This paper presents a theoretical analysis of the oscillations of an MFM tip above a…
During the past ten years nanostructures have been subject of active research. Fabrication of such systems follows well developed methods. The increase in the number of materials available for research and applications requires that the…
Magnetic resonance force microscopy (MRFM) is a scanning probe technique capable of detecting MRI signals from nanoscale sample volumes, providing a paradigm-changing potential for structural biology and medical research. Thus far, however,…
The precessional magnetization dynamics of GaMnAs thin films are characterized by broadband network analyzer ferromagnetic resonance (FMR) in a coplanar geometry at cryogenic temperatures. The FMR frequencies are characterized as function…
An improved method for characterizing the magnetic anisotropy of films with cubic symmetry is described and is applied to an yttrium iron garnet (111) film. Analysis of the FMR spectra performed both in-plane and out-of-plane from 0.7 to 8…
The broadband microstrip ferromagnetic resonance technique has been applied for detection and characterization of a magnetic inhomogeneity in a film sample. In the case of a 100nm thick Permalloy film an additional magnetically depleted top…
We have studied theoretically magnetic resonance force microscopy (MRFM) with a high frequency nanomechanical cantilever when the cantilever frequency matches the resonant frequency of a single electron spin. Our estimations show that in…
. We focused on the interaction between two ferromagnetic cobalt layers through a non-magnetic titanium layer. The magnetic properties of the structure were characterized by ferromagnetic resonance technique (FMR). The data were collected…
Magnetic bilayers with different magnetic anisotropy directions are interesting for spintronic appli- cations as they offer the possibility to engineer tilted remnant magnetization states. We investigate the ferromagnetic resonance (FMR)…
Transition metal ferromagnetic films with perpendicular magnetic anisotropy (PMA) have ferromagnetic resonance (FMR) linewidths that are one order of magnitude larger than soft magnetic materials, such as pure iron (Fe) and permalloy (NiFe)…