Related papers: Slow crack growth : models and experiments
We discuss the threshold activated extremal dynamics that is prevalent in the breakdown processes in heterogeneous materials. We model such systems by an elastic spring network with random breaking thresholds assigned to the springs.…
To better understand the mechanisms of fracture pattern development and fluid escape in low permeability rocks, we performed time-resolved in situ X-ray tomography imaging to investigate the processes that occur during the slow heating…
The phenomenon of arrest of an unstably-growing crack due to a curved weak interface is investigated. The weak interface can produce the deviation of the crack path, trapping the crack at the interface, leading to stable crack growth for…
The lifetime and performance of any engineering component, from nanoscale sensors to macroscopic structures, are strongly influenced by fracture processes. Fracture itself is a highly localized event; originating at the atomic scale by bond…
I study the influence of temperature and the crack-tip velocity of the bond breaking at the crack tip in rubber-like materials. The bond breaking is considered as a stress-aided thermally activated process and result in an effective crack…
We consider a two dimensional lattice model to describe the opening of a crack in hydraulic fracturing. In particular we consider that the material only breaks under tension and the fluid has no pressure drop inside the crack. For the case…
This paper is concerned with the problem of a semi-infinite crack steadily propagating in an elastic solid with microstructures subject to antiplane loading applied on the crack surfaces. The loading is moving with the same constant…
Dynamic fracture experiments were performed in PMMA over a wide range of velocities and reveal that the fracture energy exhibits an abrupt 3-folds increase from its value at crack initiation at a well-defined critical velocity, below the…
We present a continuum theory which describes the fast growth of a crack by surface diffusion. This mechanism overcomes the usual cusp singularity by a self-consistent selection of the crack tip radius. It predicts the saturation of the…
We formulate a theoretical model of the shear failure of a thin film tethered to a rigid substrate. The interface between film and substrate is modeled as a cohesive layer with randomly fluctuating shear strength/fracture energy. We…
The problem of dynamic symmetric branching of an initial single brittle crack propagating at a given speed under plane loading conditions is studied within a continuum mechanics approach. Griffith's energy criterion and the principle of…
This paper presents a framework for modeling failure in quasi-brittle geomaterials under different loading conditions. A micromechanics-based model is proposed in which the field variables are linked to physical mechanisms at the microcrack…
Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying…
Fracture is a fundamental mechanism of materials failure. Propagating cracks can exhibit a rich dynamical behavior controlled by a subtle interplay between microscopic failure processes in the crack tip region and macroscopic elasticity. We…
A model which accounts for cracking avalanches in piles of grains subject to external load is introduced and numerically simulated. The stress is stochastically transferred from higher layers to lower ones. Cracked areas exhibit various…
In this paper we first obtain the order of stress singularity for a dynamically propagating self-affine fractal crack. We then show that there is always an upper bound to roughness, i.e. a propagating fractal crack reaches a terminal…
Brittle materials under impact loading exhibit a transition from a cracked solid to a granular medium. Appropriate representation of this transition to granular mechanics and the resulting initial fragment size and shape distribution in…
This study investigated, experimentally and numerically, the fracturing behavior of thermoset polymer structures featuring cracks and sharp u-notches. It is shown that, even for cases in which the sharpness of the notch would suggest…
In the present paper, a fiber bundle model in (1+1)-dimensions that simulates the rupture process of a fibrous material pulled by an uniaxial force F is analyzed. In this model the load of a broken fiber is shifted in equal portions onto…
Over the last half-century, linear viscoelastic models for crack growth in soft solids have flourished but their predictions have rarely been compared to experiments. In fact, most available models are either very approximate or cast in…