Related papers: Experimental study of the sub-wavelength imaging b…
Evanescent wave amplification is observed, for the first time to our knowledge, inside a half-wavelength-thick wire medium slab used for subwavelength imaging. The wire medium is analyzed using both a spatially dispersive finite-difference…
The restrictions on the resolution of transmission devices formed by wire media (arrays of conductive cylinders) recently proposed in [Phys. Rev. B, 71, 193105 (2005)] and experimentally tested in [Phys. Rev. B, 73, 033108 (2006)] are…
Original realization of a lens capable to transmit images with sub-wavelength resolution is proposed. The lens is formed by parallel conducting wires and effectively operates as a telegraph: it captures image at the front interface and the…
In this paper, a spatially dispersive finite-difference time-domain (FDTD) method to model wire media is developed and validated. Sub-wavelength imaging properties of the finite wire medium slabs are examined. It is demonstrated that the…
An experimental evidence of subwavelength imaging with a "lens", which is a uniaxial negative permittivity wire medium slab, is reported. The slab is formed by gratings of long thin parallel conducting cylinders. Taking into account the…
Magnification of subwavelength field distributions using a wire medium slab operating in the canalization regime is demonstrated using numerical simulations. The magnifying slab is implemented by radially enlarging the distance between…
We investigate theoretically subwavelength imaging by acoustic metamaterial slabs immersed in the liquid matrix. A near-field subwavelength image formed by evanescent waves is achieved by a designed metamaterial slab with negative mass…
In this letter we experimentally demonstrate a possibility to achieve significant sub-wavelength resolution of a near-field image channeled through a layer of an electromagnetic crystal. An image having radius of $\lambda/10$ has been…
We investigate in this paper the imaging properties of an absorptive left-handed material (LHM) slab. For a line source, a geometric explanation to the reason of the thickness limitation on an ideal slab is given. For a lossy slab, the…
We investigate the subwavelength imaging capacity of a two-dimensional fanned-out plasmonic waveguide array, formed by air channels surrounded by gold metal layers for operation at near-infrared wavelengths, via finite element simulations.…
Paradoxically, imaging with resolution much below the wavelength $\lambda$ - now common place in the visible spectrum - remains challenging at lower frequencies, where arguably it is needed most due to the large wavelengths used. Techniques…
Recently it has been proposed that a planar slab of material, for which both the permittivity and permeability have the values of -1, could bring not only the propagating fields associated with a source to a focus, but could also refocus…
In this letter we study the subwavelength imaging of sparse broadband sources inside a disordered medium by processing the data acquired by a single antenna. A mathematical model has been developed for solving such problem based on the idea…
In recent years, there has been a strong interest in measuring the available bandwidth of network paths. Several methods and techniques have been proposed and various measurement tools have been developed and evaluated. However, there have…
Microscopes and various forms of interferometers have been used for decades in optical metrology of objects that are typically larger than the wavelength of light {\lambda}. However, metrology of subwavelength objects was deemed impossible…
We examine some of the optical properties of a metamaterial consisting of thin layers of alternating metal and dielectric. We can model this material as a homogeneous effective medium with anisotropic dielectric permittivity. When the…
The characteristics of an imaging system formed by a slab of a lossy left-handed material (LHM) are studied. The transfer function of the LHM imaging system is written in an appropriate product form with each term having a clear physical…
Mid-infrared spectroscopy probes molecular vibrations to identify chemical species and functional groups. Therefore, mid-infrared hyperspectral imaging is one of the most powerful and promising candidates for chemical imaging using optical…
We report a waveform-selective metasurface that operates at 2.4 GHz band, i.e. one of ISM (Industrial, Scientific and Medical) bands. This structure gives us an additional degree of freedom to control electromagnetic waves and absorbs a…
We describe the near-field microwave microscopy of microwave devices on a length scale much smaller than the wavelength used for imaging. Our microscope can be operated in two possible configurations, allowing a quantitative study of either…