Related papers: Electromagnetic shielding with polypyrrole-coated …
We present the design, fabrication, and characterization of a metamaterial absorber which is resonant at terahertz frequencies. We experimentally demonstrate an absorptivity of 0.97 at 1.6 terahertz. Importantly, this free-standing absorber…
Electromagnetic invisibility cloak requires material with anisotropic distribution of the constitutive parameters deduced from a geometrical transformation as first proposed by Pendry et al. [Science 312, 1780 (2006)]. In this paper, we…
The requirement for low operational voltage in electrowetting devices, met using thin dielectrics, is usually connected with serious material failure issues. Dielectric breakdown (visible as electrolysis) is frequently evident slightly…
The influence of an applied electric field on reversible photodegradation of disperse orange 11 (DO11) doped into PMMA is measured using digital imaging and conductivity measurements. Correlations between optical imaging, which measures…
We experimentally demonstrate at terahertz frequencies that a planar metamaterial exhibits a spectral response resembling electromagnetically induced transparency. The metamaterial unit cell consists of a split ring surrounded by another…
We model propagation of electromagnetic waves in a medium, which is inhomogeneous with a rough layer, and which hides an object. We first get an effective medium, and then we solve the problem by integral equations.
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic…
We demonstrate thin-film metamaterials with resonances in the mid-infrared wavelength range. Our structures are numerically modeled and experimentally characterized by reflection and angularly-resolved thermal emission spectroscopy. We…
We critically review our recent claims that it is possible to obtain a propellantless propulsion device similar to electrodynamic tethers by means of a closed wire partially shielded by a superconductor from the outer magnetic field. We…
During Precision Glass Molding (PGM), the molding tools have to withstand severe thermo-chemical and thermo-mechanical loads cyclically. To protect their high-quality optical surface against degradation and increase their service lifetime,…
Scattering of electromagnetic (EM) waves by many small particles (bodies) embedded in a homogeneous medium is studied. Physical properties of the particles are described by their boundary impedances. The limiting equation is obtained for…
Printed circuit metasurfaces have attracted significant attention in the microwave community for their versatile wavefront manipulation capability. Despite their promising potential in telecommunications and radar applications, few…
An experimental study of the parameters of electromagnetic and X-ray radiation was carried out on a small-sized direct-acting electron accelerator with inductive storage and a plasma opening switch. Frequency spectra have been determined,…
We use a numerical electromagnetic simulation software to investigate a filtering device consisting of a small dimensional microstrips embedded with a thin layer of ferromagnetic material and we compare our results to experimental results.…
The possibility of electron beam guiding is theoretically explored on the surface of a topological insulator through the proximity interaction with a magnetic material. The electronic band modification induced by the exchange coupling at…
Electromagnetic interference (EMI) is a significant challenge for low-field MRI systems operating without conventional Faraday-shielded rooms. Traditional EMI mitigation approaches include external shields, subject grounding via electrodes,…
This paper investigates the problem of electrophoretic motion of a polyelectrolyte capsule with a porous arbitrary charged conducting shell in an electrolyte under the action of an external electric field. The corresponding boundary value…
The use of Bluetooth Low Energy in low-range Internet of Things systems is growing exponentially. Similar to other wireless communication protocols, throughput and reliability are two key performance metrics in Bluetooth Low Energy…
The fragile quantum states of low-temperature quantum applications require protection from infrared radiation caused by higher-temperature stages or other sources. We propose a material system that can efficiently block radiation up to the…
Magnetic composite materials i.e. elastomers, polymer gels, or polymer solutions with embedded magnetic nanoparticles are useful for many technical and bio-medical applications. However, the microscopic details of the coupling mechanisms…