Related papers: Modeling the buckling and delamination of thin fil…
This work is devoted so show the appearance of different cracking modes in linearly elastic thin film systems by means of an asymptotic analysis as the thickness tends to zero. By superposing two thin plates, and upon suitable scaling law…
Compression-induced buckling instability of metal thin films on a compliant base result in surface wrinkles. A stiff thin film, perfectly bonded to an infinitely deep pre-stretched dielectric elastomer (DE) substrate, is considered. Linear…
Periodic wrinkling of a rigid capping layer on a deformable substrate provides a useful method for templating surface topography for a variety of novel applications. Many experiments have studied wrinkle formation during the compression of…
A hydrostatically stressed soft elastic film circumvents the imposed constraint by undergoing a morphological instability, the wavelength of which is dictated by the minimization of the surface and the elastic strain energies of the film.…
We study the onset of delamination blisters in a growing elastic sheet adhered to a flat stiff substrate. When the ends of the sheet are kept fixed, its growth arouses residual stresses that lead to delamination. This instability can be…
Delamination of thin films from the supportive substrates is critical issues in thin film industry and technology. The emergent two-dimensional materials, atomic layered materials, such as transition metal dichalcogenides are highly…
When a flexible plate is peeled off a thin and soft elastic film bonded to a rigid support, uniformly spaced fingering patterns develop along their line of contact. While, the wavelength of these patterns depends only on the thickness of…
Thin elastic sheets and membranes are known to wrinkle when they are stretched -- the associated physics is highly non-linear. The mechanics of thin films that exhibit unusual behavior upon stretching, when they possess auxetic structure,…
Everyday experience confirms the tendency of adhesive films to detach from spheroidal regions of rigid substrates -- what is a petty frustration when placing a sticky bandage onto an elbow or knee is a more serious matter in the coating and…
Soft adhesive contacts are ubiquitous in nature and are increasingly used in synthetic systems, such as flexible electronics and soft robots, due to their advantages over traditional joining techniques. While methods to study the failure of…
Recent experiments have imposed controlled swelling patterns on thin polymer films, which subsequently buckle into three-dimensional shapes. We develop a solution to the design problem suggested by such systems, namely, if and how one can…
Based on experiments and 3-D simulations, we show that a soft elastic film during adhesion and debonding from a rigid flat surface undergoes morphological transitions to pillars, labyrinths and cavities, all of which have the same lateral…
The instability, dynamics and morphological transitions of patterns in thin liquid films on periodic striped surfaces (consisting of alternating less and more wettable stripes) are investigated based on 3-D nonlinear simulations that…
Compressive mechanical stress exceeding a critical value leads to the formation of periodic surface buckling patterns in film-substrate systems. A comprehensive understanding of this buckling phenomenon is desired in applications where the…
This paper is motivated by the complex blister patterns sometimes seen in thin elastic films on thick, compliant substrates. These patterns are often induced by an elastic misfit which compresses the film. Blistering permits the film to…
We report on the delamination of thin ($\approx \mu$m) hydrogel films grafted to silicon substrates under the action of swelling stresses. Poly(dimetylacrylamide) (PDMA) films are synthesized by simultaneously cross-linking and grafting…
The adhesion of a stiff film onto a curved substrate often generates elastic stresses in the film that eventually give rise to its delamination. Here we predict that delamination of very thin films can be dramatically suppressed through…
Crumpling of a thin film leads to a unique stiff yet lightweight structure. The stiffness has been attributed to a complex interplay between four basic elements - smooth bends, sharp folds, localized points (developable cones), and…
We study the pinning of a two-dimensional membrane to a patterned substrate within elastic theory both in the bending rigidity and in the strain dominated regimes. We find that both the in-plane strains and the bending rigidity can lead to…
We discuss instabilities of fluid films of nanoscale thickness, with a particular focus on films where the destabilising mechanism allows for linear instability, metastability, and absolute stability. Our study is motivated by nematic…