Related papers: Screening effects in flow through rough channels
We study the Reynolds number scaling and the geometric self-similarity of a gain-based, low-rank approximation to turbulent channel flows, determined by the resolvent formulation of McKeon & Sharma (2010), in order to obtain a description…
We study turbulent flows in pressure-driven ducts with square cross-section through direct numerical simulation in a wide enough range of Reynolds number to reach flow conditions which are representative of fully developed turbulence.…
Direct numerical simulation of open channel flow over a geometrically rough wall has been performed at a bulk Reynolds number of approximately 2900. The wall consisted of a layer of spheres in a square arrangement. Two cases have been…
A direct numerical simulation of incompressible channel flow at $Re_\tau$ = 5186 has been performed, and the flow exhibits a number of the characteristics of high Reynolds number wall-bounded turbulent flows. For example, a region where the…
Direct numerical simulations (DNS) of fully-developed turbulent channel flows for very low Reynolds numbers have been performed with a larger computational box sizes than those of existing DNS. The friction Reynolds number was decreased…
The present study provides a detailed description of the forces on an ellipsoidal particle in the vicinity of the rough wall. Three-dimensional numerical simulations are performed using body-fitted mesh to estimate the drag, lift, and…
We perform direct numerical simulations of turbulent flow at friction Reynolds number $Re_\tau \approx 500-2000$ grazing over perforates plates with moderate viscous-scaled orifice diameter $d^+\approx40$--$160$ and analyse the relation…
In this paper, the TR-PIV method is used to study the internal flow field characteristics in U-shaped channels. The Reynolds number, based on the square cross section channel hydraulic diameter is 8888,13333 and 17777. Mean flow, Reynolds…
Roughness predominantly alters the near-wall region of turbulent flow while the outer layer remains similar. This makes it a prime candidate for the minimal-span channel, which only captures the near-wall flow by restricting the spanwise…
The impact of wall roughness on fully developed laminar pipe flow is investigated numerically. The roughness is comprised of square bars of varying size and pitch. Results show that the inverse relation between the friction factor and the…
We study laminar, transitional and turbulent flow in wavy pipes using direct numerical simulations for bulk Reynolds numbers between 1-5300. Flow behaviors are analyzed in terms of the friction factor f and mean velocity statistics for…
We perform direct numerical simulations (DNS) of a turbulent channel flow over porous walls. In the fluid region the flow is governed by the incompressible Navier--Stokes (NS) equations, while in the porous layers the Volume-Averaged…
We study steady streaming in a channel between two parallel permeable walls induced by oscillating (in time) blowing/suction at the walls. We obtain an asymptotic expansion of the solution of the Navier-Stokes equations in the limit when…
Long, shallow microchannels embedded in thick soft materials are widely used in microfluidic devices for lab-on-a-chip applications. However, the bulging effect caused by fluid--structure interactions between the internal viscous flow and…
The work addresses 2D and 3D turbulent transonic flows past a wall with an expansion corner. A curved shock wave is formed upstream of a cylinder located above the corner. Numerical solutions of the Reynolds-averaged Navier-Stokes equations…
Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {\bf…
Boundary layer transition triggered by a discrete roughness element generates a turbulent wedge that spreads laterally as it proceeds downstream. Historical literature reports the spreading half angle is approximately 6$^{\circ}$ in…
Prandtl's secondary flows of the second kind generated by laterally-varying roughness are studied using the linearised Reynolds-Averaged Navier-Stokes approach proposed in Zampino et al (2022). The momentum equations are coupled to the…
Surface effects become important in microfluidic setups because the surface to volume ratio becomes large. In such setups the surface roughness is not any longer small compared to the length scale of the system and the wetting properties of…
Scaling of turbulent wall-bounded flows is revealed in the gradient structures, for each of the Reynolds stress components. Within the dissipation structure, an asymmetrical order exists, that we can deploy to unify the scaling and…