Related papers: Quantitative Analysis of Hydrogenated DLC Films by…
Raman spectroscopy has been employed to distinguish between the Raman spectrum of pristine hydrogenated diamond like carbon (PHDLC) and that of electrochemically hydrogenated diamond like carbon (ECHDLC). The enhancement of the background…
The Hydrogenated Diamond Like Carbon (HDLC) thin films are deposited on Silicon substrate at room temperature using asymmetric capacitively coupled RF plasma with varying flow rates of methane. These films are undergone annealing at high…
Molecular contamination of a grazing incidence collector for extreme ultraviolet (EUV) lithography was experimentally studied. A carbon film was found to have grown under irradiation from a pulsed tin plasma discharge. Our studies show that…
The characteristic results by different diagnostics on a typical hydrogenated diamond like carbon (HDLC) film synthesized directly in a capacitatively coupled RF (13.56 MHz) discharge are described. The results show some typical charecteric…
Diamond-like carbon thin films have emerged as durable, chemically stable optical coatings for many optical and optoelectronics applications due to their hardness, chemical inertness, and optical transparency. This paper presents a novel…
Ultranonocrystalline diamond/hydrogenated amorphous carbon composite thin films consist of three different components; ultrananocrystalline diamond crystallites, hydrogenated amorphous carbon, and grain boundaries between them. Since grain…
We investigate the optical properties of hydrogen as it undergoes a transition from the insulating molecular to the metallic atomic phase, when heated by a pulsed laser at megabar pressures in a diamond anvil cell. Most current experiments…
Liquid gas was used to produce DLC films on Cu, Al and steel substrates by DC plasma technique. The absorption in IR reflectance indicates, grown films are DLC. By deconvolution of room temperature UV-visible spectra of the films grown at…
Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients…
Herein, we report on the improvement of structural quality and enhancement of photoluminescence (PL) emission for an optimally N doped nanocrystalline diamond (NCD) film. Pure and N doped nanocrystalline diamond films are synthesized on Si…
The main aim of the present work is to estimate the effective elastic stiffnesses of a two-phase diamond/$\beta$-SiC composite thin film that is fabricated by chemical vapor deposition. The parameters of linear elasticity are determined by…
We present a fast and simple way to determine the erosion rate and absorption coefficient of hydrogenated amorphous carbon films exposed to a hydrogen atomic source based on ex-situ Raman micro-spectroscopy. Results are compared to…
Diamond thin films were growth using Tequila as precursor by Pulsed Liquid Injection Chemical Vapor Deposition (PLI-CVD) onto both silicon (100) and stainless steel 304 at 850 C. The diamond films were characterized by Scanning Electron…
We revisit here how Raman spectroscopy can be used to estimate the H content in hard hydrogenated amorphous carbon layers. The H content was varied from 2 at.% to 30 at.%, using heat treatments of a a-C:H, from room temperature to 1300 K…
A novel high-energy electron cyclotron resonance (ECR) ion beam deposition (IBD) technique was used to fabricate DLC films at different ion beam energies. The ratios of sp2/sp3 bonding in the DLC coatings were determined by Raman…
Investigation of organic molecular films by a method Raman of a spectroscopy is carried out. It is shown, that values of frequencies of lines in a spectrum of the lattice oscillations of the molecular films are depressed in comparison with…
Raman spectroscopy is widely used to assess the quality of 2D materials thin films. This report focuses on $\rm{PtSe_2}$, a noble transition metal dichalcogenide which has the remarkable property to transit from a semi-conductor to a…
For hydrogen sensor and storage applications, films of Au and Pd were (i) co-sputtered at different rates or (ii) deposited in a sequential layer-by-layer fashion on a cover glass. Peculiarities of hydrogen uptake and release were optically…
Diamond and diamond-like carbon (DLC) coatings are widely employed for their exceptional mechanical, thermal and chemical properties, but their industrial application is often limited by weak adhesion to metallic substrates. In this work,…
We review recent development in Raman techniques and diamond anvil cell technology, that allow measurements of Raman of metals in the megabar pressure range. The Raman technique includes holographic transmission optics and single-stage…