Related papers: Dynamic Behavior in Piezoresponse Force Microscopy
The frequency-dependent amplitude and phase in piezoresponse force microscopy (PFM) measurements are shown to be a consequence of the Euler-Bernoulli (EB) dynamics of atomic force microscope (AFM) cantilever beams used to make the…
Detection of dynamic surface displacements associated with local changes in material strain provides access to a number of phenomena and material properties. Contact resonance-enhanced methods of Atomic Force Microscopy (AFM) have been…
The dynamic behavior of AFM is studied taking into account the nonlinear interaction forces between probe and sample. The exerted forces on the free end of micro-beam are simulated with the third degree polynomial. The effect of some…
Piezoresponse force microscopy (PFM) has been widely used for nanoscale analysis of piezoelectric properties and ferroelectric domains. Although PFM is useful because of its simple and nondestructive features, PFM measurements can be…
Mechanical properties of biological samples have been imaged with a \textit{Force Feedback Microscope}. Force, force gradient and dissipation are measured simultaneously and quantitatively, merely knowing the AFM cantilever spring constant.…
Online and real-time sensing and monitoring of the health state of complex structures, such as aircraft and critical components of power stations, are essential aspects of research in dynamics. Several types of sensors are used to capture…
Atomic Force Microscopy (AFM) methods utilizing resonant mechanical vibrations of cantilevers in contact with a sample surface have shown sensitivities as high as few picometers for detecting surface displacements. Such a high sensitivity…
Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate ferroelectrics domains. PFM gives insight into the strength of local piezoelectric coupling as well as polarization direction…
Piezoresponse force microscopy (PFM) has been used extensively for exploring nanoscale ferro/piezoelectric phenomena over the past two decades. The imaging mechanism of PFM is based on the detection of the electromechanical (EM) response…
An ongoing challenge in atomic force microscope (AFM) experiments is the quantitative measurement of cantilever motion. The vast majority of AFMs use the optical beam deflection (OBD) method to infer the deflection of the cantilever. The…
A dual-excitation method for resonant-frequency tracking in scanning probe microscopy based on amplitude detection is developed. This method allows the cantilever to be operated at or near resonance for techniques where standard phase…
Piezoresponse force microscopy (PFM) is a powerful tool for probing nanometer-scale ferroelectric and piezoelectric properties. Hysteretic switching of the phase and amplitude of the PFM response are believed to be the hallmark of…
Piezoresponse force microscopy (PFM) is a powerful tool widely used to characterize piezoelectricity and ferroelectricity at the nanoscale. However, it is necessary to distinguish microscopic mechanisms between piezoelectricity and…
Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the mechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to…
In atomic force microscopy (AFM), the angle relative to the vertical ($\theta_{i}$) that the tip apex of a cantilever moves is determined by the tilt of the probe holder and the geometries of the cantilever and actuated eigenmode $i$. Even…
Amplitude-modulation atomic force microscopy (AM-AFM) measures nanoscale surface structures by detecting changes in the cantilever oscillation amplitude, contributing to materials research. AM-AFM can non-destructively observe fragile…
Atomic Force Microscopy with SideWall (AFM SW) is widely used for nano-scale surface measurements at side surfaces. In the current study, by taking into consideration the effects of sidewall beam and its probe, an analytical method is…
Piezoresponse Force Spectroscopy (PFS) has emerged as a powerful technique for probing highly localized switching behavior and the role of microstructure and defects on switching. The application of a dc bias to a scanning probe microscope…
Atomic force microscopy (AFM) is a versatile nanoscale imaging technique. Since its spatiotemporal resolution is fundamentally limited by the minimum detectable force (MDF) arising from system noise, a deep understanding of MDF is essential…
Knowledge of surface forces is the key to understanding a large number of processes in fields ranging from physics to material science and biology. The most common method to study surfaces is dynamic atomic force microscopy (AFM). Dynamic…