Related papers: Mechanical Failure of a Small and Confined Solid

We present a microstructural model of permeability in fractured solids, where the fractures are described in terms of recursive families of parallel, equidistant cohesive faults. Faults originate upon the attainment of a tensile or shear…

One of the major factors governing the mode of failure in disordered solids is the effective range $R$, over which the stress field is modified following a local rupture event. In random fiber bundle model, considered as a prototype of…

Our goal is to unravel the mechanisms that lead to failure of a ductile two-phase material - that consists of a ductile soft phase and a relatively brittle hard phase. An idealized microstructural model is used to study damage propagation…

Failure in disordered solids is accompanied by intermittent fluctuations extending over a broad range of scales. The implied scaling has been previously associated with either spinodal or critical points. We use an analytically transparent…

The understanding of dynamic failure in amorphous materials via the propagation of free boundaries like cracks and voids must go beyond elasticity theory, since plasticity intervenes in a crucial and poorly understood manner near the moving…

The motionless conducting state of liquid metal convection with an applied vertical magnetic field confined in a vessel with insulating side walls becomes linearly unstable to wall modes through a supercritical pitchfork bifurcation.…

A long cylindrical cavity through a soft solid forms a soft microfluidic channel, or models a vascular capillary. We observe experimentally that, when such a channel bears a pressurized fluid, it first dilates homogeneously, but then…

We have carried out dilatant plasticity simulations to investigate the process of failure inside a shear band. The constitutive model accounts for possibly inhomogeneous flow within the band, void rotation and void elongation. We found that…

In the experiments on stress-induced phase transitions in SMA strips, several interesting instability phenomena have been observed, including a necking-type instability, a shear-type instability and an orientation instability. By using the…

We present simple models of particulate materials whose mechanical integrity arises from a jamming process. We argue that such media are generically "fragile", that is, they are unable to support certain types of incremental loading without…

In order to design tougher materials, it is crucial to understand the relationship between their composition and their resistance to fracture. To this end, we investigate the fracture toughness of usual sodium silicate glasses (NS) and…

In this letter, structural rigidity concepts are used to understand the origin of instabilities in granular aggregates. It is shown that: a) The contact network of a noncohesive granular aggregate becomes exactly isostatic in the limit of…

Quasi-static strain-controlled measurements of stress vs strain curves in macroscopic amorphous solids result in a nonlinear looking curve that ends up either in mechanical collapse or in a steady-state with fluctuations around a mean…

Amorphous solids, confined on the nano-scale, exhibit a wealth of novel phenomena yet to be explored. In particular, the response of such solids to a mechanical load is not well understood and, as has been demonstrated experimentally, it…

Due to the intertwining between electronic nematic and elastic degrees of freedom, lattice defects and structural inhomogeneities commonly found in crystals can have a significant impact on the electronic properties of nematic materials.…

A confined incompressible elastic film does not deform uniformly when subjected to adhesive interfacial stresses but with undulations which have a characteristic wavelength scaling linearly with the thickness of the film. In the classical…

What characterises a solid is its way to respond to external stresses. Ordered solids, such crystals, display an elastic regime followed by a plastic one, both well understood microscopically in terms of lattice distortion and dislocations.…

Mechanical stability of Ag and Cu printed and evaporated metallization lines on polymer substrates is investigated by means of monotonic tensile and cyclic bending tests. It is shown that lines which demonstrate good performance during…

A shear band of finite length, formed inside a ductile material at a certain stage of a con- tinued homogeneous strain, provides a dynamic perturbation to an incident wave field, which strongly influences the dynamics of the material and…

We consider materials whose mechanical integrity is the result of a jamming process. We argue that such media are generically "fragile": unable to support certain types of incremental loading without plastic rearrangement. Fragility is…