Related papers: Nanometer-spaced platinum electrodes with calibrat…
A simple and highly reproducible technique is demonstrated for the fabrication of metallic electrodes with nanometer separation. Commercially available bare gold colloidal nanoparticles are first trapped between prefabricated…
We report a new technique for fabricating metallic electrodes on insulating substrates with separations on the 1 nm scale. The fabrication technique, which combines lithographic and electrochemical methods, provides atomic resolution…
We report a simple and reproducible method to fabricate two metallic electrodes made of different metals with a nanometer-sized gap. These electrodes are fabricated by defining a pair of gold electrodes lithographically and…
We investigate the fabrication of electrical contacts using ion- and electron-beam induced deposition of platinum at the sub-\mu m scale. Halos associated with the metal surface decoration are characterized electrically in the 0.05-2 \mu m…
Pairs of electrodes with nanometer separation (nano-gap) are achieved through an electromigration-induced break-junction (EIBJ) technique at room temperature. Lithographically defined gold (Au) wires are formed by e-beam evaporation over…
Nano-size objects like metal clusters present an ideal system for the study of quantum phenomena and for constructing practical quantum devices. Integrating these small objects in a macroscopic circuit is, however, a difficult task. So far…
The process of creating an atomically defined and robust metallic tip is described and quantified using measurements of contact conductance between gold electrodes and numerical simulations. Our experiments show how the same conductance…
Nanomechanical shuttles transferring small groups of electrons or even individual electrons from one electrode to another offer a novel approach to the problem of controlled charge transport. Here, we report the fabrication of…
We report a method for fabricating nanogaps directly with electron beam lithography (EBL). The primary resolution-limit of EBL, electron back-scattering, is reduced dramatically by using a thin-film as a substrate. We show that this…
For nanoscale electrical characterization and device fabrication it is often desirable to fabricate planar metal electrodes separated by large aspect ratio gaps with interelectrode distances well below 100 nm. We demonstrate a self-aligned…
The fabrication of metallic single-walled carbon nanotube electrodes separated by gaps of typically 20nm width by electron-beam-induced oxidation is studied within an active device configuration. The tube conductance is measured…
We have combined direct nanofabrication by local anodic oxidation with conventional electron-beam lithography to produce a parallel double quantum dot based on a GaAs/AlGaAs heterostructure. The combination of both nanolithography methods…
We report on the electric measurements of an individual Au nanoparticle with an ultra-high contact resistance of about $10^{19} \Omega$. The high-impedance measurements have been carried out by counting the electrons that are transferred…
We have fabricated single-electron transistors from individual metal nanoparticles using a geometry that provides improved coupling between the particle and the gate electrode. This is accomplished by incorporating a nanoparticle into a gap…
We synthesized monodisperse cobalt-platinum nanoparticles Co(0.14-0.22)Pt(0.86-0.78) of 9 nm in diameter by colloidal chemistry methods and deposited them by the Langmuir-Blodgett technique as highly ordered monolayers onto substrates with…
A tool for manipulation of specific nanoparticles is essential for nanofabrication. This paper describes a new class of nanoscale techniques for manipulating individual nanoparticles on an insulating substrate using a focused electron beam.…
Applying ac voltages, we trapped gold nanoparticles between microfabricated electrodes under well-defined conditions. We demonstrate that the nanoparticles can be controllably fused together to form homogeneous gold nanowires with…
We developed a process to fabricate nanoscale metallic gate electrodes on scanning probe cantilevers, including on the irregular surface of protruding cantilever tips. The process includes a floating-layer technique to coat the cantilevers…
Creating a good contact between electrodes and graphene nanoribbons (GNRs) has been a longstanding challenge in searching for the next GNR-based nanoelectronics. This quest requires the controlled fabrication of sub-20 nm metallic gaps, a…
We have developed a technology to reproducibly make gaps with distance control on the single atom scale. The gold contacts are flat on the nanometre scale and are fabricated on an oxidized aluminium film that serves as a gate. We show that…