Related papers: Memory effect on the formation of drying cracks
The mechanical response of a wet granular layer to imposed shear is studied experimentally at low applied normal stress. The granular material is immersed in water and the shear is applied by sliding a plate resting on the upper surface of…
Various kinds of heterogeneity in solids including atomistic discreteness affect the fracture strength as well as the failure dynamics remarkably. Here we study the effects of an initial crack in a discrete model for fracture in…
Recently the scaling laws describing the roughness development of fracture surfaces was proposed to be related to the macroscopic elastic energy released during crack propagation [Mor00]. On this basis, an energy-based asymptotic analysis…
The thermal effects of plastic and frictional heat generation and elevated temperature were examined along with the role of adhesion in the context of galling wear, using a representative crystal plasticity, normally loaded, sliding surface…
The pattern development of multiple cracks in extremely anisotropic solids such as bilayer or multilayer two-dimensional (2D) crystals contains rich physics, which, however, remains largely unexplored. We studied crack interaction across…
Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural…
The propagation of an interfacial crack front through a weak plane of a transparent Plexiglas block has been studied experimentally. A stable crack in mode I was generated by loading the system by an imposed displacement. The local…
Crystal plasticity is mediated through dislocations, which form knotted configurations in a complex energy landscape. Once they disentangle and move, they may also be impeded by permanent obstacles with finite energy barriers or frustrating…
We study the relation between a threshold-force based model at the microscopic scale and mode I fracture at the macroscopic scale in a system of discrete interacting springs. Specifically, we idealize the contact between two surfaces as…
We numerically investigate the stress distribution in pastes after horizontal rotation by using an elasto-plastic model. Residual stress remains as a memory of rotation. The stress in the circumferential direction increases after the…
Polymer-based plastics exhibit time-dependent deformation under constant stress, known as creep, which can lead to rupture or static fatigue. A common misconception is that materials under tolerable static loads remain unaffected over time.…
A micromechanical approach is set-up to analyse the increase in elastic stiffness related to development of plastic deformation (the elastoplastic coupling concept) occurring during the compaction of a ceramic powder. Numerical simulations…
Crumpled paper or drapery patterns are everyday examples of how elastic sheets can respond to external forcing. In this Letter, we study experimentally a novel sort of forcing. We consider a circular flexible plate clamped at its center and…
Crack advance from short or long pre-cracks is predicted by the progressive failure of a cohesive zone in a strain gradient, elasto-plastic solid. The presence of strain gradients leads to the existence of an elastic zone at the tip of a…
We experimentally investigate the effect of freezing on the spreading of a water drop. Whenever a water drop impacts a cold surface, whose temperature is lower than 0{\deg}C, a thin layer of ice grows during the spreading. This freezing has…
A variational modeling framework for hydraulically induced fracturing of elastic-plastic solids is developed in the present work. The developed variational structure provides a global minimization problem. While fracture propagation is…
Recently, tribologists have shown increasing interest in rate-dependent phenomena occurring in viscoelastic fractures. However, in some cases, conflicting results are obtained despite the use of similar theoretical models. For this reason,…
The dynamic of contact formation between soft materials immersed in a fluid is accompanied by fluid drainage and elastic deformation. As a result, controlling the coupling between lubrication pressure and elasticity provides strategies to…
The effect of a local shear transformation on plastic deformation of a three-dimensional amorphous solid is studied using molecular dynamics simulations. We consider a spherical inclusion, which is gradually transformed into an ellipsoid of…
A growing body of experimental work indicates that physical vapor deposition provides an effective route for preparation of stable glasses, whose properties correspond in some cases to those expected for glasses that have been aged for…