Related papers: Void Formation and Roughening in Slow Fracture
Post mortem analysis of fracture surfaces of ductile and brittle materials on the $\mu$m-mm and the nm scales respectively, reveal self affine graphs with an anomalous scaling exponent $\zeta\approx 0.8$. Attempts to use elasticity theory…
We employ a recently developed model that allows the study of two-dimensional brittle crack propagation under fixed grip boundary conditions. The crack development highlights the importance of voids which appear ahead of the crack as…
Three dimensional calculations of ductile crack growth under mode I plane strain, small scale yielding conditions are carried out using an elastic-viscoplastic constitutive relation for a progres- sively cavitating plastic solid with two…
Voids are one of the many material defects present at the microscopic length scale. They are primarily responsible for the formation of cracks and hence contribute to ductile fracture. Circular voids tend to deform into elliptical voids…
Analytical models have been developed for fracture propagation over the last several decades and are now considered with renewed interest; the range of their applicability varies for different materials and different loading conditions.…
Fracture growth in a material is strongly influenced by the presence of inhomogeneities, which deviate crack trajectories from rectilinearity and deeply affect failure. Increasing crack tortuosity is connected to enhancement of fracture…
Our goal is to unravel the mechanisms that lead to failure of a ductile two-phase material - that consists of a ductile soft phase and a relatively brittle hard phase. An idealized microstructural model is used to study damage propagation…
Highly-deformable materials, from synthetic hydrogels to biological tissues, are becoming increasingly important from both fundamental and practical perspectives. Their mechanical behaviors, in particular the dynamics of crack propagation…
A decrease of fracture toughness of irradiated materials is usually observed, as reported for austenitic stainless steels in Light Water Reactors (LWRs) or copper alloys for fusion applications. For a wide range of applications (e.g.…
In this study, the crack propagation of the pre-cracked mono-crystal nickel with the voids and inclusions has been investigated by molecular dynamics simulations. Different sizes of voids, inclusions and materials of inclusions are used to…
The method of iterated conformal maps is developed for quasi-static fracture of brittle materials, for all modes of fracture. Previous theory, that was relevant for mode III only, is extended here to mode I and II. The latter require…
Traditional computational approaches in simulating crack propagation in perfectly brittle materials rely on the estimate of stress intensity factors along the rupture front. This proves highly challenging in 3D when the crack geometry…
We study the crackling noise emerging during single crack propagation in a specimen under three-point bending conditions. Computer simulations are carried out in the framework of a discrete element model where the specimen is discretized in…
Void coalescence and interaction in dynamic fracture of ductile metals have been investigated using three-dimensional strain-controlled multi-million atom molecular dynamics simulations of copper. The correlated growth of two voids during…
A novel phase-field for ductile fracture model is presented. The model is developed within a consistent variational framework in the context of finite-deformation kinematics. A novel coalescence dissipation introduces a new coupling…
The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process. Considering a 2D spring network submitted to an external load…
Voids can limit the life of engineering components. This motivates us to understand local plasticity around voids in a nickel base superalloy combining experiments and simulations. Single crystal samples were deformed in tension with…
Ductile metals undergo a considerable amount of plastic deformation before failure. Void nucleation, growth and coalescence is the mechanism of failure in such metals. {\alpha}/{\beta} titanium alloys are ductile in nature and are widely…
This paper presents an algorithm for the efficient simulation of ductile crack propagation through heterogeneous structures, as e.g. metallic microstructures, which are given as voxel data. These kinds of simulations are required for e.g.,…
Cavitation is a common damage mechanism in soft solids. Here, we study this using a phase-separation technique in stretched, elastic solids to controllably nucleate and grow small cavities by several orders of magnitude. The ability to make…