Related papers: Surface oxidation of liquid Sn
The oxidation of the Ni(111) surface is studied experimentally with low energy electron microscopy and theoretically by calculating the electron reflectivity for realistic models of the NiO/Ni(111) surface with an ab-initio scattering…
We suggest that the lithiation of pristine SnO forms a layered Li$_\text{X}$O structure while the expelled tin atoms agglomerate into 'surface' planes separating the Li$_\text{X}$O layers. The proposed lithiation model widely differs from…
The applicability of standard methods for compositional analysis is limited for H-containing films. Neutron reflectometry is a powerful, non-destructive method that is especially suitable for these systems due to the large negative…
If metal surfaces are exposed to sufficiently oxygen-rich environments, oxides start to form. Important steps in this process are the dissociative adsorption of oxygen at the surface, the incorporation of O atoms into the surface, the…
The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the…
The formation of ultrathin oxide layers on metal surfaces is a non-thermally-activated process which takes place spontaneously at very low temperatures within nanoseconds. This paper reports mechanistic details of the initial oxidation of…
X-ray reflectivity measurements on the free surface of liquid Sn are presented. They exhibit the high-angle peak, indicative of surface-induced layering, also found for other pure liquid metals (Hg, Ga and In). However, a low-angle peak,…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
The formation of a hydroxylated native oxide layer on Si(001) under wet conditions is studied by means of first principles molecular dynamics simulations. Water molecules are found to adsorb and dissociate on the oxidised surface leading to…
The possible formation of oxides or thin oxide films (surface oxides) on late transition metal surfaces is recently being recognized as an essential ingredient when aiming to understand catalytic oxidation reactions under technologically…
Silicon together with its native oxide SiO$_2$ was recognized as an outstanding material system for the semiconductor industry in the 1950s. In state-of-the-art device technology, SiO$_2$ is widely used as an insulator in combination with…
We have studied the segregation of P and B impurities during oxidation of the Si(100) surface by means of combined static and dynamical first-principles simulations based on density functional theory. In the bare surface, dopants segregate…
This study investigates two critical aspects of the gas sensing mechanism in metal oxide sensors: (1) the conditions that maximize chemisorbed oxygen concentration as a function of temperature and oxygen partial pressure, and (2) which…
The atomic surface and interface structure of bare and metal-coated ZnO(0001) Zn-polar wafers were investigated via surface x-ray diffraction. All bare samples showed the presence of a (1x1) overlayer of oxygen atoms located at the on-top…
X-ray diffraction with synchrotron radiation has been used for the first time to study chemical interaction in the MnO-ZnO system at 4.8 GPa and temperatures up to 1600 K. Above 750 K, the chemical reaction between MnO and ZnO has been…
Zirconium nitride (ZrN) is a refractory material with good mechanical and thermal properties. It is therefore a good candidate for hard surface treatment at high temperature. In this work, we report the growth and characterization of ZrN by…
Hydride precipitation in niobium-based, superconducting circuits is a damaging side-effect of hydrofluoric acid treatments used to clean and thin the Nb surface oxides and Si oxides. The precipitate microstructure is difficult to probe…
$SrVO_3$ (SVO), a model correlated metal and a promising transparent conducting oxide, develops a several-nanometer-thick near-surface region (NSR), rich in $V^{5+}$ species under ambient conditions. This oxidized layer obscures the…
To help provide insight into the remarkable catalytic behavior of the oxygen/silver system for heterogeneous oxidation reactions, purely sub-surface oxygen, and structures involving both on-surface and sub-surface oxygen, as well as…
The oxygen dissociation and the oxidized structure on the pristine C3N monolayer in exposure to air are the inevitably critical issues for the C3N engineering and surface functionalization yet have not been revealed in detail. Using the…