Related papers: Defect structures in MgB2 wires introduced by hot …
Superconducting MgB2 thin films were fabricated on Al2O3(0001) substrates under an ex-situ processing conditions. Boron thin films were deposited by pulsed laser deposition followed by a post-annealing process. Resistance measurements of…
The K- and Co-doped BaFe2As2 (Ba-122) superconducting compounds are potentially useful for applications because they have upper critical fields (Hc2) of well over 50 T, Hc2 anisotropy Gamma < 2, and thin film critical current densities…
It was shown by computer simulation that coarsened grains with lower content of defects are formed at uniaxial deformation of a four-grain infinite nano-wire. The structure similar to crystal filaments was formed in the case of tension. The…
The effects of Fe-ion irradiation on the crystal structure and superconducting properties of MgB$_2$ thin films were investigated. Pristine samples were prepared using hybrid physical-chemical vapor deposition (HPCVD), and ion irradiation…
Ultrahigh electrostrains (greater than 1%) in several piezoceramic systems have been reported since 2022, which attract more and more interest in the field of piezoelectricity; however, the mechanism is still unclear. Here, we have directly…
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a…
Strain engineering has been used to modify materials properties in ferroelectric, superconducting, and ferromagnetic thin films. The advantage of strain engineering is that it can achieve unexpected enhancement in certain properties, such…
High-grade MgB2(0001) films were grown on Mg(0001) by means of ultra-high-vacuum molecular beam epitaxy. Low energy electron diffraction and x-ray diffraction data indicate that thick films are formed by epitaxially oriented grains with…
The microwave response of three high-density bulk MgB2 samples has been investigated in the linear and nonlinear regimes. The three samples, characterized by different mean size of grains, have been obtained by reactive infiltration of…
Single crystals of MgB2 have been grown at high pressure via the peritectic decomposition of MgNB9. The crystals are of a size up to 1.5x0.9x0.2 mm3 with a weight up to 0.23 mg, and typically have transition temperatures between 37 and 39…
Dense pure and doped (Mg1-xAx)B2 samples with A = Na, Ca, Cu, Ag, Zn and Al were synthesized at high pressure - high temperature in a multi anvils press (3.5-6 GPa, 900-1000C) for x up to 0.20. They were studied by x-ray diffraction,…
We report the study of the polycrystalline MgB2 phase formation during the fabrication processes. Three major phases are identified in different sintering temperature ranges according to the corresponding superconducting properties and the…
Magneto-opitcal studies of a c-oriented epitaxial MgB2 film with critical current density 10^7 A/cm^2 demonstrate a breakdown of the critical state at temperatures below 10 K [cond-mat/0104113]. Instead of conventional uniform and gradual…
Recently the interest about Bi-2212 round wire superconductor for high magnetic field use has been enhancing despite the fact that an increase of the critical current is still needed to boost its successful use in such applications. Recent…
In-plane electrical transport properties of MgB2 single crystals grown under high pressure of 4-6 GPa and temperature of 1400-1700oC in Mg-B-N system have been measured. For all specimens we found sharp superconducting transition around…
Measurements of the penetration depth $\lambda (T,H)$ in the presence of a DC magnetic field were performed in $MgB_2$ wires. In as-prepared wires $\lambda (T,H<130 Oe)$ shows a strong diamagnetic downturn below $\approx 10 K$. A DC…
Precursor MgB2 thin films were prepared on sapphire substrates by magnetron sputtering. Influence of ex-situ annealing process on superconducting MgB2 thin films roughness is discussed. Optimized annealing process of MgB precursor thin…
Cu-stabilized 18-filament MgB2 tapes with NbZr buffer have been fabricated by using powder-in-tube technique. The phase composition and microstructure were examined by X-ray diffraction and optical microscopy. Transport critical current…
Processing methods are described for the development of magnesium diboride wire using the chemical vapor deposition (CVD) to produce long lengths of suitably doped starting boron fiber. It is found that titanium can be co-deposited with the…
Resistive, magnetoresistive and magnetic properties of four kinds of pressed CrO2 powders, synthesized by hydrothermal method of chromic anhydride have been investigated. The particles in powders constituted of rounded particles (diameter…