Related papers: Mg(B,O)2 precipitation in MgB2
We report on a quantitative investigation into the effect of size and distribution of rod-shaped \beta' precipitates on strength and ductility of a Mg-Zn alloy. Despite precipitation strengthening being crucial for the practical application…
Sintered powders and wires of superconducting $MgB_2$ have been fabricated under a variety of conditions in order to determine details of the diffusion of the $Mg$ into $B$ and to study the types of defects that arise during growth. For…
Isothermal ageing of plastically deformed Mg-Zn-Y alloys resulted in precipitation along {10-12} twin boundaries. The bulky precipitates formed had structures similar to those recently reported for the rod-like \beta' precipitates, but…
Modern engineering alloys have bespoke microstructures, where features such as precipitates are used to control properties. In many Ni-based alloys, carbo-nitride precipitates are introduced to strengthen and improve performance. These…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
A detailed study of the precipitation of the \gamma' (AlAg2) phase in undeformed aluminium-silver alloys has been conducted. Several previously unreported features were observed, including the formation of discrete three-dimensional…
Here we describe the results of an atomic resolution study of the structure and composition of both the interior of the grains, and the grain boundaries in polycrystalline MgB2. We find that there is no oxygen within the bulk of the grains…
In this letter we demonstrate that if oxygen can be properly supplied to (Nb-Zr)-Sn wires, ZrO2 precipitates will form during the heat treatment, refining the Nb3Sn grain size markedly. Here, a Nb3Sn subelement was fabricated in which…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
The system MgxB2 has been investigated to investigate possible nonstoichiometry in MgB2. When synthesized at 850oC, MgB2 is a line compound with a possible Mg vacancy content of about 1%. Small changes in lattice constants as a function of…
A detailed study has been carried out on $\gamma^\prime$ (AlAg$_2$) precipitates in Al-Ag and Al-Ag-Cu alloys to reconcile the conflicting reports on chemical ordering and stacking faults in this phase. High angle annular dark field…
The hydration of magnesium oxide (MgO) to magnesium hydroxide (Mg(OH)$_2$) is a fundamental solid-surface chemical reaction with significant implications for materials science. Yet its molecular-level mechanism from water adsorption to…
Transition metals implanted in single crystal MgO can precipitate out at grain boundaries or remain embedded in bulk. Using first-principles calculations based on density functional theory we have calculated the thermodynamic stability and…
Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (M$_6$Ni$_{16}$Si$_{7}$) precipitates in an austenite matrix. Using…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
The MgB2 superconductor synthesized in a flowing argon atmosphere using nanometer magnesium powder as the raw materials, denoted as Nano-MgB2, has been studied by the technique of in-situ high temperature resistance measurement (HT-RT…
The local composition Mg:B of MgB2 powder was systematically changed through annealing. Correlations were observed between the Mg loss and the lattice parameters a/c and the microstrain of MgB2. Direct wavelength-dispersive-spectrum and XRD…
Sr1-xMnxTiO3 (where x = 0.03, 0.05, 0.07 and 0.09) was synthesized via different routes that include solid-state, oxalate precipitation and freeze drying. In oxalate precipitation technique, compositions corresponding to 3 and 5 mol %…
Precipitates are main microstructural features to provide high temperature creep strength and radiation resistance in structural materials for fusion energy systems. However, the mechanisms of precipitate stability under irradiation in…
The mechanisms of dislocation/precipitate interaction as well as the critical resolved shear stress were determined as a function of temperature in a Mg-4 wt. % Zn alloy by means of micropillar compression tests. It was found that the…