Related papers: Fabrication of mesoscopic Nb wires using conventio…
Neutral atoms can be trapped and manipulated with surface mounted microscopic current carrying and charged structures. We present a lithographic fabrication process for such atom chips based on evaporated metal films. The size limit of this…
Continued advances in superconducting qubit performance require more detailed understandings of the many sources of decoherence. Within these devices, two-level systems arise due to defects, interfaces, and grain boundaries, and are thought…
MgB2 superconducting wires were produced by the Mg diffusion method. Scanning electron microscopy (SEM), optical microscopy, dispersive x-ray analysis (EDS) and XRD diffraction were used to study the physical structure and content of the…
We report a two-step process for the fabrication of superconductor-insulator-normal metal tunnel junctions using NbN as the superconducting electrode and its surface oxide as the insulating tunnel barrier, and investigate its efficacy in…
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system…
The transport properties of superconducting single crystal Pb nanowires of 55 nm and 70 nm diameter are studied by standard four electrodes method. Resistance-temperature (R-T) scans and magneto-resistance (R-H) measurements show a series…
We report a simple method for the fabrication of Niobium superconducting (SC) tips for scanning tunnelling microscopy which allow atomic resolution. The tips, formed in-situ by the mechanical breaking of a niobium wire, reveal a clear SC…
We present Nb thin films deposited in-situ on GaAs by combining molecular beam epitaxy and magnetron sputtering within an ultra-high vacuum cluster. Nb films deposited at varying power, and a reference film from a commercial system, are…
We characterize inductors fabricated from ultra-thin, approximately 100 nm wide strips of niobium (Nb) and niobium nitride (NbN). These nanowires have a large kinetic inductance in the superconducting state. The kinetic inductance scales…
Niobium thin film wires were fabricated using electron beam lithography with a four layer liftoff mask system, and subsequently thinned by anodisation. The resistance along the wire was monitored in situ and trimmed by controlling the…
We present results from an extensive study of fluctuation phenomena in superconducting nanowires made from sputtered NbN. Nanoscale wires were fabricated in form of a meander and operated at a constant temperature T~0.4Tc(0). The…
Superconducting thin films have been prepared in a two-step in-situ process, using the Mg-B plasma generated by pulsed laser ablation. The target was composed of a mixture of Mg and MgB2 powders to compensate for the volatility of Mg and…
We report on the preparation and the physical properties of superconducting (TaNb)_1-x(ZrHfTi)_x high-entropy alloy films. The films were prepared by means of magnetron sputtering at room temperature, with x ranging from 0 to 1 with an…
Transmission electron beams (TEBs) have long been used to study and manipulate materials at nanometer scales. In the late 1970's, Cherns demonstrated surface pitting in Au films upon exposure to a 1MeV TEB and observed crystal dislocations…
We report the fabrication of MgB2 with bulk superconducting properties by conventional solid state methods at temperatures as low as 550 C. Mg deficiencies of the type Mg1-xB2 were tested. Tc was found to decrease by about 1K at large x,…
A MgB2 superconducting tape has been successfully prepared by a new way of boron diffusion into Mg tape. This tape superconductor has a Tc of 39 K with a sharp transition width of 0.4 K, high bulk critical current density jc of 6.7*10^5…
A complexing molecule electrodeposition technique has been developed for the deposition of low cost, lightweight MgB2 films, for the first time. Different deposition parameters such as bath composition, deposition potential, current…
Hybrid superconductor/semiconductor devices play a crucial role in advancing quantum science and technology by merging the properties of superconductors and semiconductors. To operate these devices at high temperature, Niobium could…
Superconducting FeSe in the form of wires and tapes were successfully fabricated using a novel gas diffusion procedure. Structural analysis by mean of x-ray diffraction shows that themain phase of tetragonal PbO-type FeSe was obtained by…
We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…