Related papers: Clogging Time of a Filter
We investigate clogging in depth filtration, in which a dirty fluid is ``cleaned'' by the trapping of dirt particles within the pore space during flow through a porous medium. This leads to a gradient percolation process which exhibits a…
The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry…
When suspended particles are pushed by liquid flow through a constricted channel they might either pass the bottleneck without trouble or encounter a permanent clog that will stop them forever. However, they may also flow intermittently…
Flows through porous media can carry suspended and dissolved materials. These sediments may deposit inside the pore-space and alter its geometry. In turn, the changing pore structure modifies the preferential flow paths, resulting in a…
Clogging can occur whenever a suspension of particles flows through a confined system. The formation of clogs is often correlated to a reduction in the cross-section of the channel. In this study, we consider the clogging by bridging, i.e.,…
We study numerically how multiple deformable capsules squeeze into a constriction. This situation is largely encountered in microfluidic chips designed to manipulate living cells, which are soft entities. We use fully three-dimensional…
We study the transport of inertial particles in water flow in porous media. Our interest lies in understanding the accumulation of particles including the possibility of clogging. We propose that accumulation can be a result of hydrodynamic…
The sudden arrest of motion due to confinement is commonly observed via the clogging transition in the flow of particles through a constriction. We present results of a simple experiment to elucidate a similar transition in the…
Blockage of pores by particles is found in many processes, including filtration and oil extraction. We present filtration experiments through a linear array of ten channels with one dimension which is sub-micron, through which a dilute…
We report on density waves in granular material, investigated both experimentally and numerically. When granular material falls through a long narrow pipe one observes recurrent clogging. The kinetic energy of the falling particles…
We study the kinetics of infiltration in which contaminant particles, which are suspended in a flowing carrier fluid, penetrate a porous medium. The progress of the ``invader'' particles is impeded by their trapping on active ``defender''…
We use event-driven pore network modeling to study the transport of hydrogel particles through disordered porous media -- a process that underlies diverse applications. By simulating particle advection, deformation, and clogging at the pore…
We study computationally the dynamics of forced, Brownian particles through a disordered system. As the concentration of mobile particles and/or fixed obstacles increase, we characterize the different regimes of flow and address how…
We study a simple 1D model of dust rods, with mean size \mu, passing through a parallel 1D alignment of pores as a problem of clogging of a filter by dust grains; \mu is kept less than the pore size, s. We assume that the filter is…
During the transport of colloidal suspensions in microchannels, the deposition of particles can lead to the formation of clogs, typically at constrictions. Once a clog is formed in a microchannel, advected particles form an aggregate…
We report on a microfluidic method that allows measurement of a small concentration of large contaminants in suspensions of solid micrometer-scale particles. To perform the measurement, we flow the colloidal suspension through a series of…
Filters that act by adsorbing contaminant onto their pore walls will experience a decrease in porosity over time, and may eventually block. As adsorption will generally be larger towards the entrance of a filter, where the concentration of…
Particle suspensions in confined geometries can become clogged, which can have a catastrophic effect on function in biological and industrial systems. Here, we investigate the macroscopic dynamics of suspensions in constricted geometries.…
Clogging is a common obstacle encountered during the transport of suspensions and represents a significant energy and material cost across applications, including water purification, irrigation, biopharmaceutical processing, and aquifer…
Microorganisms often encounter strong confinement and complex hydrodynamic flows while navigating their habitats. Combining finite-element methods and stochastic simulations, we study the interplay of active transport and heterogeneous…