Related papers: Ultra-Thin Floating Mirrors
Micro-electro-mechanical systems (MEMS) technology can provide for deformable mirrors (DMs) with excellent performance within a favorable economy of scale. Large MEMS-based astronomical adaptive optics (AO) systems such as the Gemini Planet…
The design of a CubeSat telescope for academic research purposes must balance complicated optical and structural designs with cost to maximize performance in extreme environments. Increasing the CubeSat size (eg. 6U to 12U) will increase…
Glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of glass transition temperature (Tg) as the thickness of the polymer film reduces below the…
Optical device is a key component in our lives and organic liquid crystals are nowadays widely used to reduce human imprint. However, this technology still suffers from relatively high costs, toxicity and other environmental impacts, and…
The absolute reflectance of a reflector and its point spread function are the key parameters of a telescope for measuring light flux. Typically, one is using low-cost technologies for producing mirrors for the needs of astro-particle…
A basic feature of liquid drops is that they can merge upon contact to form a larger drop. In spite of its importance to various applications, drop coalescence on pre-wetted substrates has received little attention. Here, we experimentally…
Geometrically decorated two-dimensional (2D) discrete surfaces can be more effective than conventional smooth reflectors in managing wave radiation. Constructive non-specular wave scattering permits the scattering angle to be other than…
When an oscillating line source is placed in front of a special mirror consisting of an array of flat uniformly spaced ferrite rods, half of the image disappeared at some frequency. We believe that this comes from the coupling to photonic…
The tension between recent observations and theories on cosmic ray (CR) diffusion necessitates exploration of new CR diffusion mechanisms. We perform the first numerical study on the mirror diffusion of CRs that is recently proposed by…
Microfluidic devices are increasingly used in synchrotron-based experiments to deliver and probe liquid samples, offering advantages such as minimal sample consumption and reduced radiation damage. Despite their growing use, few devices…
We report on the realization of an optical microcavity consisting in the plane-plane arrangement of two suspended resonant mirrors possessing spectrally overlapping high-quality factor internal resonances. We first investigate its generic…
Super-resolution imaging using sub-diffraction field localization by micron sized transparent beads (microspheres) was recently demonstrated [1]. Practical applications in microscopy require control over the positioning of the microspheres.…
A technique to measure microscopic rotational motion is presented. When a small fluorescent polystyrene microsphere is attached to a larger polystyrene microsphere, the larger sphere acts as a lens for the smaller microsphere and provides…
As predicted by A. Einstein [Ann. Phys. (Leipzig) 17, 891 (1905)], the electromagnetic wave reflected at a moving mirror is frequency-upshifted and intensified as high as the mirror velocity is close to the speed of light in vacuum.…
Recently, there has been much interest in using lubricated flat and nano-/micro-structured surfaces to achieve extreme liquid-repellency: any foreign droplet immiscible with the underlying lubricant layer was shown to slide off at a small…
The shape of liquid surface in a rotating frame depends on the angular velocity. In this experiment, a fluid in a rectangular container with a small width is placed on a rotating table. A smartphone fixed to the rotating frame…
Negative reflection occurs when light is reflected towards the same side of the normal to the boundary from which it is incident. This exotic optical phenomenon, which provides a new avenue towards light manipulation, is not only yet to be…
Transparent glass ceramic materials, with microstructures comprised of dispersed nanocrystallites in a residual glass matrix, offer the prospect of nonlinear optical properties. However, good transparency requires low optical scattering and…
A metallic film of arbitrary thickness is considered. We show that the problem of description of surface plasma oscillations (surface plasmons) with reflection boundary conditions allows analytic solution. Besides, this problem allows…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…