Related papers: Liquid Mirror Telescopes: A progress report
The MAGIC telescopes are two Imaging Atmospheric Cherenkov Telescopes (IACTs) located on the Canary island of La Palma. With 17m diameter mirror dishes and ultra-fast electronics, they provide an energy threshold as low as 50 GeV for…
Prototype optical microscopes, built to pursue developments in advanced imaging techniques, need specific optomechanical constructions: preferably with high flexibility in the elements arrangement, easy access to the optical paths,…
The French-Italian interferometric gravitational wave detector VIRGO is currently being commissioned. Its principal instrument is a Michelson laser interferometer with 3 km long optical cavities in the arms and a power-recycling mirror. The…
Chapter 12 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in…
Limited access to corrective eyewear remains a significant medical, societal, and economic challenge, even in the 21st century. More than 1 billion people suffer from uncorrected vision impairment, with the vast majority residing in…
The next major advancement in astronomy and cosmology will be driven by deep observations using very sensitive telescopes with high spatial and spectral resolution capabilities. An international consortium of astronomers, including Indian…
The Large Optical/infrared Telescope (LOT) is a ground-based 12m diameter optical/infrared telescope which is proposed to be built in the western part of China in the next decade. Based on satellite remote sensing data, along with…
Deformable mirrors with very high order correction generally have smaller dynamic range of motion than what is required to correct seeing over large aperture telescopes. As a result, systems will need to have an architecture that employs…
A new generation of sub-orbital platforms will be operational in the next few years. These new telescopes will operate from airborne and balloon-borne platforms where the atmosphere is transparent enough to allow sensitive measurements to…
I very briefly describe the latest generation near infrared (1-2.5 micron) instruments which are available on, or under development for `large' (D>=3.5 m) telescopes. Most of the imagers under construction are limited to relatively small…
Active reflector is one of the key technologies for constructing large telescopes, especially for the millimeter/sub-millimeter radio telescopes. This article introduces a new efficient laser angle metrology system for the active reflector…
Chapter 17 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in…
In this article, we present a detailed analysis of the statistical properties of seeing for the Muztagh-ata site which is the candidate site for hosting future Chinese Large Optical/infrared Telescope (LOT) project. The measurement was…
Reflective membrane mirrors provide a lightweight, low-cost alternative to traditional optics for next-generation large-aperture telescopes, but their non-rigid, thin structure poses challenges for surface metrology. We present a…
Planet Formation research is blooming in an era where we are moving from speaking about "protoplanetary disks" to "planet forming disks" (Andrews et al., 2018). However, this transition is still motivated by indirect (but convincing) hints.…
This article reports the advances on the development of mid-infrared integrated optics for stellar interferometry. The devices are fabricated by laser writing techniques on chalcogenide glasses. Laboratory characterizaton is reported and…
We present the most recent technical improvements on SpIOMM, an Imaging Fourier Transform Spectrometer (IFTS) attached to the 1.6 telescope of the Mont M\'egantic Observatory. The recent development of SpIOMM demonstrates that the concept…
Laser metal deposition (LMD) is an additive manufacturing technique, whose performances can be influenced by several factors and parameters. Monitoring their evolution allows for a better comprehension and control of the process, hence…
The High Energy Stereoscopic System (H.E.S.S.) experiment is one of the largest observatories for gamma-ray astronomy. It consists of four telescopes with a reflecting dish diameter of 12m (CT1 to CT4) and a newer large telescope (CT5) with…
We propose and experimentally demonstrate the Transformable Reflective Telescope (TRT) Kit for educational purposes and for performing various optical tests with a single kit. The TRT Kit is a portable optical bench setup suitable for…