Related papers: Building a CCD Spectrograph for Educational or Ama…
As telescopes get larger, the size of a seeing-limited spectrograph for a given resolving power becomes larger also, and for ELTs the size will be so great that high resolution instruments of simple design will be infeasible. Solutions…
We demonstrated the fabrication of a low-cost and high-resolution papercraft smartphone spectrometer and characterized its performance by recording spectra from gas discharge lamps. The optical design and a lab-made narrow slit used in the…
Spectroscopy is one of the most important tools that an astronomer has for studying the universe. This chapter begins by discussing the basics, including the different types of optical spectrographs, with extension to the ultraviolet and…
Speckle imaging is a well known method to achieve diffraction-limited (DL) imaging from ground-based telescopes. The traditional observing method for speckle has been to observe a single, unresolved, source per telescope pointing over a…
This paper describes the on-telescope performance of the Wide Field Spectrograph (WiFeS). The design characteristics of this instrument, at the Research School of Astronomy and Astrophysics (RSAA) of the Australian National University (ANU)…
The Swift X-ray Telescope focal plane camera is a front-illuminated MOS CCD, providing a spectral response kernel of 135 eV FWHM at 5.9 keV as measured before launch. We describe the CCD calibration program based on celestial and on-board…
The purpose of this project is to investigate the use of charge couple devices (CCDs) to detect electrons directly. This can be done in transmission electron microscopy (TEM) for electrons over 100 KeV, but for space plasma instruments,…
The most successful method used so far to search for extrasolar planets is the radial velocity technique, where periodical shifts on the measured emission from a star provide evidence for an orbiting planet. This method has been used on…
Scientific CCDs designed in thick high resistivity silicon (Si) are excellent detectors for astronomy, high energy and nuclear physics, and instrumentation. Many applications can benefit from CCDs ultra low noise readout systems. The…
Cherenkov detectors are in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small Cherenkov detector with limited resources, which could be used to observe the cosmic…
Doppler observations of exoplanet systems have been a very expensive technique, mainly due to the high costs of high-resolution stable spectrographs. Recent advances in instrumentation enable affordable Doppler planet detections with…
Optical spectrometers are fundamental across numerous disciplines in science and technology. However, miniaturized versions, while essential for in situ measurements, are often restricted to coarse identification of signature peaks and…
Radiometry has been of fundamental importance in astronomy from the early beginnings. In this review, we provide an overview of how to achieve a valid laboratory calibration of space telescopes and discuss ways to reliably extend this…
Transferring the nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. In the case of NCs for display and lightning, the focus was on reduced Auger recombination and maintaining…
Tunable filters are set to revolutionize many aspects of experimental astrophysics, particularly for applications in observational cosmology. After a summary of the fundamentals of classical spectroscopy, we present a review of the current…
The Swift X-ray Telescope (XRT) focal plane camera is a front-illuminated MOS CCD, providing a spectral response kernel of 144 eV FWHM at 6.5 keV. We describe the CCD calibration program based on celestial and on-board calibration sources,…
We present the result from a comprehensive laboratory and on-sky characterization of the commercial spectrograph system consisting of a PIXIS 1300BX charge-coupled device (CCD) camera and an IsoPlane 320A spectrograph as part of the…
Spectrograph costs have become the limiting factor in multiplexed fiber-based spectroscopic instruments, because tens of millions of resolution elements (spectral x spatial) are now required. Catadioptric (Schmidt-like) designs allow faster…
We propose a mechanism for subwavelength focusing at optical frequencies based on the use of a tapered microtube fabricated from a glass capillary tube. Using coherent illumination at 671nm and a near-field scanning optical microscope probe…
We investigate the potential of photonic lantern (PL) fiber fed spectrometers for two-dimensional spectroastrometry. Spectroastrometry, a technique for studying small angular scales by measuring centroid shifts as a function of wavelength,…