Related papers: The optical reflector system for the CANGAROO-II i…
We have developed light and durable mirrors made of CFRP (Carbon Fiber Reinforced Plastics) laminates for the reflector of the new CANGAROO-II 7 m telescope. The reflector has a parabolic shape (F/1.1) with a 30 m^2 effective area which…
We have been successful in developing light and durable mirrors made of CFRP (Carbon Fiber Reinforced Plastic) laminates for the reflector of the new CANGAROO-II 7 m telescope. The reflector has a parabolic shape (F/1.1) with a 30 m^2…
CANGAROO group constructed an imaging air Cherenkov telescope (CANGAROO-II) in March 1999 atWoomera, South Australia to observe celestial gamma-rays in hundreds GeV region. It has a 7m parabolic mirror consisting of 60 small plastic…
The reflector used by an imaging atmospheric Cherenkov telescope (IACT) consists of a tessellated array of mirrors mounted on a large frame. This arrangement allows for a very large reflecting surface with sufficient optical quality for the…
CANGAROO-III is an Imaging Atmospheric Cherenkov Telescope (IACT) array of four 10 m telescopes for very high energy (sub-TeV) gamma-ray astronomy. A design study of the CANGAROO-III telescope system was carried out using the Monte Carlo…
The Cherenkov Telescope Array (CTA) observatory for very high-energy gamma rays will consist of about a hundred of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here…
Composite mirrors for gamma-ray astronomy have been developed to fulfill the specifications required for the next generation of Cherenkov telescopes represented by CTA (Cherenkov Telescope Array). In addition to the basic requirements on…
Lightweight parabolic mirrors for solar concentrators have been fabricated using carbon fiber reinforced polymer (CFRP) and a nanometer scale optical surface smoothing technique. The smoothing technique improved the surface roughness of the…
Mirror facets of the H.E.S.S. imaging atmospheric Cherenkov telescopes are aligned using stars imaged onto the closed lid of the PMT camera, viewed by a CCD camera. The alignment procedure works reliably and includes the automatic analysis…
A Cherenkov imaging camera for the CANGAROO-III experiment has been developed for observations of gamma-ray induced air-showers at energies from 10$^{11}$ to 10$^{14}$ eV. The camera consists of 427 pixels, arranged in a hexagonal shape at…
Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill…
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov…
The Cherenkov Telescope Array (CTA) is a future ground-based gamma-ray astronomy detector that will consist of more than 100 Imaging Atmospheric Cherenkov Telescopes of different sizes. The total reflective surface of roughly 10 000 m$^2$…
Imaging Atmospheric Cherenkov Telescopes for very-high energy gamma-ray astronomy need mirror with high reflectance roughly in the wavelength between 300 and 550 nm. The current standard reflective layer of such mirrors is aluminum. Being…
The Cherenkov Telescope Array (CTA) Observatory for high-energy gamma-ray astronomy will comprise several tens of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here we…
Imaging atmospheric Cherenkov telescopes (IACTs) used for ground-based gamma-ray astronomy at TeV energies use reflectors with areas on the order of 100m$^2$ as their primary optic. These tessellated reflectors comprise hundreds of mirror…
Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures to map the faint Cherenkov light emitted in extensive air showers onto their image sensors. Segmented reflectors fulfill these needs using mass…
Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill…
The design of the camera support structures for the Cherenkov Telescope Array (CTA) Large Size Telescopes (LSTs) is based on an elliptical arch geometry reinforced along its orthogonal projection by two symmetric sets of stabilizing ropes.…
For the current generation of Imaging Atmospheric Cherenkov Telescopes (IACTs), with their large mirrors and their cameras with fine segmentation of photodetectors, the focusing capability is a relevant issue. The optical system of an IACT…