Related papers: SC-1 Etching of Niobium and Titanium Nitride Thin …
Lithium niobate is one of the most sought-after materials for nanophotonic devices, including frequency converters, modulators, and quantum light sources. Integration of lithium niobate into optical devices, however, is hampered by…
This research for Eco-materials focuses on the improvement of photo response of titania thin films. The goal of this research is to find a suitable substrate for decreasing the band-gap of titania, to improve the microstructure and to seek…
We report a reproducible technique for the fabrication of sharp superconducting Nb tips for scanning tunneling microscopy (STM) and scanning tunneling spectroscopy. Sections of Nb wire with 250 $\mu$m diameter are dry etched in an SF$_6$…
The superconducting critical temperature (Tc > 15K) of niobium titanium nitride (NbTiN) thin films allows for low-loss circuits up to 1.1 THz, enabling on-chip spectroscopy and multi-pixel imaging with advanced detectors. The drive for…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
Microwave loss in superconducting titanium nitride (TiN) films is attributed to two-level systems in various interfaces arising in part from oxidation and microfabrication-induced damage. Atomic layer etching (ALE) is an emerging…
Niobium nitride (NbN) is a metallic superconductor that is widely used for superconducting electronics due to its high transition temperature ($T_c$) and kinetic inductance. Processing-induced damage negatively affects the performance of…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
Uniformity in thickness and electronic properties of superconducting niobium titanium nitride (NbTiN) thin films is a critical issue for upscaling superconducting electronics, such as microwave kinetic inductance detectors for submillimeter…
We present results of a fabrication-process development for the lithographic pattern transfer into the sub-100nm range by combining electron-beam lithography and reactive dry etching to obtain high quality niobium-based light-sensitive…
Originally developed technique based on generation of plasma-cluster flux emitted from cathode spots at surface of an integrally cold cathode has been applied for deposition of niobium superconductive (thick) film materials. Possibility for…
A single crystal niobium thin film was grown using molecular beam epitaxy on a c-plane sapphire wafer. Several samples were fabricated into dc resistivity test devices and coplanar waveguide resonator chips using the same microfabrication…
Titanium nitride (TiN) presents superior electrical conductivity with mechanical and chemical stability and compatibility with the semiconductor fabrication process. Here, we fabricated epitaxial and polycrystalline TiN (111) thin films on…
We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically…
Nanofabrication of topological insulator (TI) devices is essential for accessing edge and interface states, but conventional lithography and etching compromise the atomically clean surfaces required for scanning tunneling microscopy and…
Scaling superconducting digital circuits requires fundamental changes in the current material set and fabrication process. The transition to 300 mm wafers and the implementation of advanced lithography are instrumental in facilitating…
Superconducting (SC) tips for scanning tunneling microscopy (STM) can enhance a wide range of surface science studies because they offer exquisite energy resolution, allow the study of Josephson tunneling, or provide spatial contrast based…
Nowadays, microelectronics and nanoelectronics require the search for new materials, including masks for creating structures. Today, the intermediate hard mask strategy is one of the key issues in achieving a good balance between…
Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…