Related papers: Preliminary Structural Study of Chromium Coatings …
Zircaloy cladding corrosion in Light Water Reactors (LWRs) results in the formation of an outer oxide layer and in the thinning of the metallic portion of the cladding. At the \'Ecole Polytechnique F\'ed\'erale de Lausanne (EPFL), we aim to…
The present work explores the suitability of Al-Cu-Si ternary alloys as hightemperature metallic phase change materials (PCMs) for thermal energy storage systems (TESS) operating between 550__C and 850__C. While prior research has primarily…
VN precipitates used to strengthen ARAFM steels for fusion applications dissolve under high Fe ion irradiation (100 dpa at 10^-3 dpa s^-1, 600 C). This study examined point defects and solute substitutions using atom probe tomography,…
We report on the production of a novel cold mixture of fermionic $^{53}$Cr and $^{6}$Li atoms delivered by two Zeeman-slowed atomic beams and collected within a magneto-optical trap (MOT). For lithium, we obtain clouds of up to $4 \,10^8$…
The development of nuclear fuels requires unsteady/transient testing for design process and qualification under postulated accident conditions. Breach, rupture, fracture, melting, and other fuel failure modes may occur during the use of…
Here, we propose a novel approach to experimentally and theoretically study the properties of QCD matter under new extreme conditions, namely having an initial temperature over 300~MeV and baryonic charge density over three times the values…
This paper deals with the comparison between thermal and Fission Enhanced Diffusion (FED) of uranium into zirconia, representative of the inner face of cladding tubes. The experiments under irradiation are performed at the Institut Laue…
Chromium depletion at grain boundaries (GBs) due to selective attack is a critical issue in the molten salt corrosion of NiCr alloys. Despite the importance of GBs in this process from numerous experimental studies, most theoretical work…
Direct measurements of photoexcited carrier dynamics in nickel are made using few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy at the nickel M$_{2,3}$ edge. It is observed that the core-level absorption lineshape…
A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $\mu g/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to…
Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles as feedstock,…
The heat of formation of Fe-Cr alloys undergoes an anomalous change of sign at small Cr concentrations. This observation raises the question whether there are intermetallic phases present in this composition range. Here we report the…
When exploring new magnetic materials, the effect of alloying plays a crucial role for numerous properties. By altering the alloy composition, it is possible to tailor, e.g., the Curie temperature ($T_\text{C}$). In this work, $T_\text{C}$…
Atom probe tomography (APT) is extensively used to measure the local chemistry of materials. Site-specific preparation via a focused ion beam (FIB) is routinely implemented to fabricate needle-shaped specimens with an end radius in the…
We report here the structural, electrical and magnetic properties of as-cast V$_{1-x}$Zr$_x$ alloys ($x$ =0 - 0.4) at low temperatures. We observe that all the alloys undergo successive peritectic and eutectic reactions during cooling from…
In the present work we have analyzed the transverse momentum spectra of charged particles in high multiplicity $pp$ collisions at LHC energies $\sqrt s $ = 5.02 and 13 TeV using the Color String Percolation Model (CSPM). For heavy ions…
We investigated the growth of twisted graphene on graphene/silicon carbide (SiC-G) templates by metal-free chemical vapor deposition (CVD) through a sequential thermal (ST) process, which exploits the ultraclean surface of SiC-G without…
Nanocrystalline Cu-3 at.% Zr powders with ~20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550-950 {\deg}C. Annealing drove Zr segregation to the grain boundaries, which led to the…
We study THz emission from ferromagnet / nonmagnetic material (FM/NM) spintronic nanostructures in which the $Ni_xCu_{1-x}$ alloy with different $x$ is used as an FM, an NM, or both layers. The stoichiometric composition of the NiCu alloys…
QCD predicts that strongly interacting matter will undergo a transition from a state of hadronic constituents to a plasma of unbound quarks and gluons. We first survey the conceptual features of this transition and its description in finite…