Related papers: Enhanced stability from co-resonant cavities in a …
We report on the development of a diode laser system - the `Faraday laser' - using an atomic Faraday filter as the frequency-selective element. In contrast to typical external-cavity diode laser systems which offer tunable output frequency…
We demonstrate phase and frequency stabilization of a diode laser at the thermal noise limit of a passive optical cavity. The system is compact and exploits a cavity design that reduces vibration sensitivity. The sub-Hz laser is…
We characterize the frequency-sensitivity of a cavity-stabilized laser to inertial forces and temperature fluctuations, and perform real-time feed-forward to correct for these sources of noise. We measure the sensitivity of the cavity to…
We have designed photonic crystal suspended membranes with optimized optical and mechanical properties for cavity optomechanics. Such resonators sustain vibration modes in the megahertz range with quality factors of a few thousand. Thanks…
Fiber Fabry--Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 10^9, with an optimum of…
Ultrahigh continuous-wave intensities (>300 GW/cm$^2$) in high-NA optical cavities enable applications from phase-contrast electron microscopy to ultradeep dipole traps for molecules. However, the intensity can be limited by the parametric…
We have implemented a simple and cost-effective digital system for long-term frequency stabilisation and locking to an arbitrary wavelength of the single-frequency ring CW Ti:Sapphire laser. This system is built around two confocal…
Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously…
We have implemented highly stable and tunable frequency references using optical high finesse cavities which incorporate a piezo actuator. As piezo material we used ceramic PZT, crystalline quartz, or PZN-PT single crystals. Lasers locked…
We present a modified approach to laser optical-feedback cavity-enhanced absorption spectroscopy. The technique involves continuously scanning the length of a high-finesse cavity to periodically lock a diode laser to the cavity resonance,…
Coupling an emitter to a Fabry-P\'{e}rot optical cavity can provide a coherent and strong light-matter interface whose performance in a variety of applications depends critically on the emitter-photon coupling strength. Altering the…
We demonstrated for the first time the characterization of absolute frequency stability of three reference cavities by cross beating three laser beams which are independently locked to these reference cavities. This method shows the…
We present a novel method of machining optical fiber surfaces with a CO${}_2$ laser for use in Fiber-based Fabry-Perot Cavities (FFPCs). Previously FFPCs were prone to large birefringence and limited to relatively short cavity lengths…
To increase the spectral efficiency of coherent communication systems, lasers with ever-narrower linewidths are required as they enable higher-order modulation formats with lower bit-error rates. In particular, semiconductor lasers are a…
This paper delivers the first report of a mid-infrared (MIR) waveguide array design that employs complementary and asymmetric tapered Euler-shaped bends. These provide greater fabrication flexibility to achieve subwavelength-pitch…
Light in the mode of a Fabry-P\'erot cavity heats the mirror surfaces via optical absorption, causing thermoelastic deformation of the mirror substrates, which in turn dictates the shape of the mode. We develop an analytical model which…
Optical cavities provide high sensitivity to dispersion since their resonance frequencies depend on the index of refraction. We present a direct, broadband, and accurate measurement of the modes of a high finesse cavity using an optical…
We study the optical characteristics of a photonic crystal (PhC) heterostructure cavity consisting of two-dimensional monolayer PhC, sandwiched between two identical passive multilayers. In the range of stopband of the multilayer, guided…
We develop and demonstrate a compact (less than $6$ mL) portable Fabry-P\'{e}rot optical reference cavity. A laser locked to the cavity is thermal noise limited at $2\times10^{-14}$ fractional frequency stability. Broadband feedback control…
We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem…