Related papers: Design and Optimization of a Pole-less 0.2 T C-Typ…
This paper presents the design and experimental characterization of a 1 T electromagnet tailored to meet the demands of a Magnetic Resonance Imaging (MRI) system conceived for spatial resolutions at the level of tens of microns. For high…
We present a design and the optimization of an irregular-shaped ring-pair magnet array that generates a 1D monotonic field pattern for 2D head imaging in a low-field portable MRI system. The magnet rings are discretized into fan-shaped ring…
Very-low-field MRIs are becoming increasingly popular due to their portability and adaptability to different environments. They are being successfully used for various clinical applications, leading to a paradigm shift in the way imaging…
Access to and availability of MRI scanners is typically limited by their cost, siting and infrastructure requirements. This precludes MRI diagnostics, the reference standard for neurological assessment, in patients who cannot be transported…
This paper presents the design concept of the dipole magnet with 50 mm aperture, 20 T nominal field and 13% margin based on a six-layer cos-theta (CT) hybrid coil design. Due to the high stresses and strains in the coil at high field,…
Portable low-cost MRI systems have the potential to enable point-of-care and timely MRI diagnosis, and to make this imaging modality available to routine scans and to underdeveloped areas. With simplicity, no maintenance, no power…
Presently, Magnetic Resonance Imaging (MRI) magnets must deliver excellent magnetic field (B0) uniformity to achieve optimum image quality. Long magnets can satisfy the homogeneity requirements but require considerable superconducting…
We present a permanent magnet arrangement that can achieve a tuneable axial magnetic field from 1.80(8)-2.67(2) kG along the z-axis, where (x,y) = (0,0), with a rms field variation of less than 1% over a length of 25 mm. The instrument…
Multi-modality imaging hardware can be integrated in a single gantry to collect diverse datasets for complementary information and spatiotemporal correlation, with excellent examples including PET-CT and PET-MRI. However, there is no CT-MRI…
A design for a permanent magnet system is proposed that generates spatially homogeneous, constant magnetic field gradients, thus creating conditions suitable for MRI without gradient coils and amplifiers. This is achieved by superimposing a…
Objective. To develop methods to design the complete magnetic system for a truly portable MRI scanner for neurological and musculoskeletal (MSK) applications, optimized for field homogeneity, field of view (FoV) and gradient performance…
In this paper, a new type magnet is proposed and processed to uniform the transverse beam profile. Compeared to the octupole, the new type magnet can prove a similar octupole magnet field in the middle, but the rise rate declines quickly in…
We design and demonstrate a compact, robust and simple to assemble and tune permanent magnet suitable for NMR relaxometry measurements of microfluidic flows. Soft-magnetic stainless steel plates, incorporated inside the magnet airgap, are…
Magnetic structures of the noncentrosymmetric magnet Sr$_2$MnSi$_2$O$_7$ were examined through neutron diffraction for powder and single-crystalline samples, as well as magnetometry measurements. All allowed magnetic structures under the…
The standard design method for conventional straight dipole magnets is improved in this paper. The good field region is not symmetric with respect to the magnet mechanical center, and its width is not enlarged to include the beam sagitta.…
We optimised the magnetic field homogeneity of two canonical designs for mobile microfluidic NMR applications: two parallel magnets with an air gap and a modified Halbach array. Along with the influence of the sample length, general design…
A permanent magnet array (PMA) is a preferred source of magnetic field for body-part-dedicated low-field (<0.5 T) portable magnetic resonance imaging (MRI) because it has a small footprint, no power consumption, and no need for a cooling…
Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles…
In this work we present a novel, compact, power efficient magnetic field source design for magnetic field imaging microscopy. The device is based on a pair of diametrically magnetized permanent magnet cylinders with electro-mechanical…
The usage of permanent magnets to shape the confining magnetic field of a stellarator has the potential to reduce or eliminate the need for non-planar coils. As a proof-of-concept for this idea, we have developed a procedure for designing…