Related papers: How do sub-bandgap reflectors affect the performan…
Compound semiconductors have been the predominant building blocks for the current mid-infrared thermophotovoltaic devices relevant to sub-2000 K heat conversion and power beaming. However, the prohibitively high cost associated with these…
With the rapidly growing interest in bifacial photovoltaics (PV), a worldwide map of their potential performance can help assess and accelerate the global deployment of this emerging technology. However, the existing literature only…
The conventional notion for achieving high efficiency in thermophotovoltaics (TPVs) is to use a monochromatic emission at a photon energy corresponding to the band gap of the cell. Here, we prove theoretically that such a notion is only…
Thermophotovoltaic (TPV) energy conversion efficiency has recently surpassed 30%. The key behind such high efficiency is the inclusion of a highly efficient mirror in the rear of the TPV cell that turns back to the thermal emitter the…
We develop a new approach to calculate the obtainable limit of photoconversion efficiency of tandem solar cells (SCs) and applied it to SCs with both vertical and lateral designs at AM0 and AM1.5 conditions. To get the maximum efficiency,…
We observed and studied strong reduction of optical reflection from the surface of InP wafers after high-temperature annealing. The effect is observed over a wide range of the incident wavelengths, and in the transparency band of the…
An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts.…
Conservation voltage reduction (CVR) has been widely implemented in distribution networks and helped utilities effectively reduce energy and peak load. However, the increasing penetration level of solar photovoltaic (PV) has affected…
Recently, significant progress in the development of III-V/Si dual-junction solar cells has been achieved. This not only boosts the efficiency of Si-based photovoltaic solar cells, but also offers the possibility of highly efficient green…
Selective solar absorbers (SSAs) with high performance are the key to concentrated solar power systems. Optical metamaterials are emerging as a promising strategy to enhance selective photon absorption, however, the high-temperature…
Tandem solar cells can better harness the energy of the solar spectrum. Chalcopyrite solar cells have drawn attention, being the only highly efficient devices with bandgap around 1.0 eV, suitable for bottom cells. In the quest for better…
The observed open circuit voltages in best performing solar cells are explained outside of the recombination paradigm, based on such factors as electrostatic screening, Meyer-Neldel effect, and lateral nonuniformities. The underlying…
One-dimensional (1D) polymer-based photonic crystals (PhCs) in the $1.55~\mu{}m$ wavelength range can be easily created using a two-photon direct laser writing system. To achieve shorter period structures, we report the use of thermal…
The sun (~6000 K) and outer space (~3 K) are the original heat source and sink for human beings on Earth. The energy applications of absorbing solar irradiation and harvesting the coldness of outer space for energy utilization have…
This paper proposes the implementation of a circuit based simulation for a Solar Photovoltaic (PV) cell in order to get the maximum power output. The model is established based on the mathematical model of the PV module. As the PV cell is…
It is of significance to incorporate spectral selectivity technology into solar thermal engineering, especially at high operational temperatures. This work demonstrates spectrally selective solar absorbers made of multilayer tungsten,…
Concentrating solar power, particularly parabolic trough system with solar concentrations less than 50, requires spectrally selective solar absorbers that are thermally stable at high temperatures of 400degC above to achieve high…
We theoretically show that a thermophotovoltaic (TPV) system enhanced by a wire metamaterial opens the door to a prospective microgap thermophotovoltaics which will combine high electric output with relatively low temperatures of the…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
Due to their tailorable optical properties, organic semiconductors show considerable promise for use in indoor photovoltaics (IPVs), which present a sustainable route for powering ubiquitous "Internet-of-Things" devices in the coming…