Related papers: Assessment of Reynolds-Averaged Navier-Stokes Mode…
To fully evaluate a turbulent flow, Direct Numerical Simulation (DNS) is the most accurate method by far and requires considerable computational power and time; not optimum for industry standards. Developing an alternative model, providing…
The development of advanced simulation tools is essential, both presently and in the future, for improving wind-energy design strategies, paving the way for a complete transition to sustainable solutions. The Reynolds-averaged Navier-Stokes…
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…
Reynolds-Averaged Navier-Stokes(RANS) method will still play a vital role in the following several decade in aerospace engineering. Although RANS models are widely used, empiricism and large discrepancies between models reduce the…
Reynolds-averaged Navier-Stokes (RANS) equations are widely used in engineering turbulent flow simulations. However, RANS predictions may have large discrepancies due to the uncertainties in modeled Reynolds stresses. Recently, Wang et al.…
In the turbulence modeling community, significant efforts have been made to quantify the uncertainties in the Reynolds-Averaged Navier--Stokes (RANS) models and to improve their predictive capabilities. Of crucial importance in these…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
Reynolds Averaged Navier Stokes (RANS) models represent the workhorse for studying turbulent flows in industrial applications. Such single-point turbulence models have limitations in accounting for the influence of the non-local physics and…
This study presents a compact data-driven Reynolds-averaged Navier-Stokes (RANS) model for wind turbine wake prediction, built as an enhancement of the standard \(k\)-\(\varepsilon\) formulation. Several candidate models were discovered…
The partially-averaged Navier-Stokes (PANS) equations are used to predict the variable-density Rayleigh-Taylor (RT) flow at Atwood number 0.5 and maximum Reynolds number $500$. This is a prototypical problem of material mixing featuring…
Wing-body junction flows occur when a boundary layer encounters an airfoil mounted on the surface. The corner flow near the trailing edge is challenging for the linear eddy viscosity Reynolds Averaged Navier-Stokes (RANS) models, due to the…
In this paper, investigations are conducted using Reynolds-averaged Navier-Stokes (RANS) turbulence models to investigate the importance of turbulence modelling for nasal inspiration at a constant flow rate of 250 ml/s. Four different,…
This chapter provides an introduction to data-driven techniques for the development and calibration of closure models for the Reynolds-Averaged Navier--Stokes (RANS) equations. RANS models are the workhorse for engineering applications of…
Reynolds-averaged Navier-Stokes (RANS) turbulence models (such as k-\epsilon models) are still widely used for engineering applications because of their relatively simplicity and robustness. In fully developed plane channel flow (i.e. the…
Computational fluid dynamics using the Reynolds-averaged Navier-Stokes (RANS) remains the most cost-effective approach to study wake flows and power losses in wind farms. The underlying assumptions associated with turbulence closures are…
We assess the suitability of Reynolds-Averaged Navier-Stokes (RANS) simulation using the Spallart-Almaras (SA) turbulence model as a closure in analysing the performance of fluidic Active Flow Control (AFC) applications. In particular, we…
Several methods have been proposed to characterize the complex interactions in turbulent wakes, especially for flows with strong cyclic dynamics. This paper introduces the concept of Fourier-Averaged Navier-Stokes (FANS) equations as a…
Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes…
Accurate prediction of mixing transition induced by interfacial instabilities is vital for engineering applications, but has remained a great challenge for decades. For engineering practices, Reynolds-averaged Navier-Stokes simulation…