Related papers: Comparative study of room temperature and quench c…
We study the effects of time-dependent substrate/film temperature in the deposition of a mesoscopically thick film using a statistical model that accounts for diffusion of adatoms without lateral neighbors whose coefficients depend on an…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
This research investigates the structural, topological, electrical and optical properties of pulsed laser deposited polycrystalline BiFeO3 thin films on silicon and glass substrate at varying deposition temperatures ranging from 400 degC to…
We report an experimental study of quench condensed ($2K\le T \le 15K$) disordered ultrathin films of {\rm Bi} where localisation effects and superconductivity compete. Experiments are done with different substrates and/or different…
A number of the charge-density-wave materials reveal a transition to the macroscopic quantum state around 200 K. We used graphene-like mechanical exfoliation of titanium diselenide crystals to prepare a set of films with different…
Varying the substrate temperature changes structural and magnetic properties of spinel ferrite NZFO thin films. XRD of films grown at different temperature display only 004 reflections, without any secondary peaks, showing growth…
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 {\deg}C. The multilayers were then annealed inside a separate vacuum furnace at 950 {\deg}C for 3h. The…
We study how the substrate temperature influences the structural properties of carbon films deposited by PVD (physical vapor deposition) techniques. We adapted a heating system inside the deposition chamber, with temperatures up to…
Chromium thin films deposited on silicon substrates by DC magnetron sputtering were systematically investigated as a function of film thickness, using a DC power of 50 W and a post-deposition annealing temperature of 200 C. Two types of…
Here we demonstrate the controlled growth of Bi(110) and Bi(111) films on an (insulating) $\alpha$-Al$_2$O$_3$(0001) substrate by surface X-ray diffraction and X-ray reflectivity using synchrotron radiation. At temperatures as low as 40 K,…
Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…
Pb-free ferroelectric thin films are gaining attention due to their applicability in memory, sensor, actuator, and microelectromechanical system. In this work, Na$_{0.4}$K$_{0.1}$Bi$_{0.5}$TiO$_3$ (NKBT0.1) ferroelectric thin films were…
In recent decades, the growth of ultrathin epitaxial bismuth (Bi) films on various substrates has garnered interest due to their unique electronic properties. We report upon the growth and electrical transport properties of epitaxial Bi…
The electronic properties of thin metallic films deviate from the corresponding bulk ones when the film thickness is comparable with the wavelength of the electrons at the Fermi level due to quantum size effects (QSE). QSE are expected to…
In the present study we report on properties of ZnCoO films grown at relatively low temperature by the Atomic Layer Deposition, using two reactive organic zinc precursors (dimethylzinc and diethylzinc). The use of these precursors allowed…
This study investigates the temperature-induced hysteretic behavior of resistivity and magnetoresistance in electrodeposited bismuth films, with a focus on their application as absorbers in transition-edge sensors (TESs) for X-ray…
The electrical transport properties of amorphous Bi films prepared by sequential quench deposition have been studied in situ. A superconductor-insulator (S-I) transition was observed as the film was made increasingly thicker, consistent…