Related papers: Programmatically Generated Microparticles Using SU…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
A comprehensive evaluation of the effect and limitations of variable current density and electrolyte composition on layer porosity and microstructure changes of porous silicon (pSi) multilayer stacks is reported. Following these results,…
We have produced ultrathin epitaxial graphite films which show remarkable 2D electron gas (2DEG) behavior. The films, composed of typically 3 graphene sheets, were grown by thermal decomposition on the (0001) surface of 6H-SiC, and…
Assembled monolayers of colloidal particles are crucial for various applications, including opto-electronics, surface engineering, as well as light harvesting, and catalysis. A common approach for self-assembly is the drying of a colloidal…
Many of the properties of graphene are tied to its lattice structure, allowing for tuning of charge carrier dynamics through mechanical strain. The graphene electro-mechanical coupling yields very large pseudomagnetic fields for small…
In a hierarchical nanopatterning routine relying exclusively on self-assembly processes we combine crystal surface reconstruction, microphase separation of copolymers, and selective metal diffusion to produce monodisperse metal…
Clean loading of silica nanoparticles with a radius as small as ~50 nm is required for experiments in levitated optomechanics that operate in ultra-high vacuum. We present a cheap and simple experimental method for dry launching of silica…
Abstract: In this paper we show that experimentally realizable apparently piezoelectric thin-film super-lattices can be created from non-piezoelectric materials provided an odd-order (e.g. trilayer) stacking sequence is used. The…
Microgels are colloidal-scale particles individually made of crosslinked polymer networks that can swell and deswell in response to external stimuli, such as changes to temperature or pH. Despite a large amount of experimental activities on…
The preparation of Ag 2+x Se thin films with thicknesses between 4 nm and 3000 nm by pulsed laser deposition on single crystalline NaCl and MgO substrates is reported. The films are perfectly dense and show a good lateral uniformity with a…
Establishing good electrical contacts to nanoscale devices is a major issue for modern technology and contacting 2D materials is no exception to the rule. One-dimensional edge-contacts to graphene were recently shown to outperform surface…
Scanning probe microscopy (SPM) investigations of on-surface chemistry on passivated silicon have only shown in-plane chemical reactions, and studies on bare silicon are limited in facilitating additional reactions…
Recent simulations have studied the formation of patterns in a binary mixture of immiscible surfactants absorbed onto the surface of a spherical nanoparticle. The resulting patterns (Janus, spots and stripes) were in good agreement with…
The fabrication of functional micro- and nano-electronic devices requires the deposition of high-quality materials of different electronic material classes, such as conductors, semiconductors and insulators. To establish…
Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen…
Since the pioneering work of S.Y. Chou et al.[1] Nano Imprint Lithography (NIL) has emerged as a promising technique for surface patterning, opening for numerous applications ranging from nanophotonics[2] to microfluidics[3]. NIL basically…
Electrochemical 3D printing of conductors with microscale resolution holds a great promise for a wide range of applications, but the choice of suitable metals for these technologies remains limited. Most efforts so far have been focused on…
Copper is one of the most extensively studied materials for energy conversion and catalytic systems, with a wide range of other applications from nanophotonics to biotechnology. However, existing synthesis methods are limited with many…
Self-assembly of nanoparticles at fluid-fluid interfaces is a promising route to fabricate functional materials from the bottom-up. However, directing and controlling particles into highly tunable and predictable structures -- while…
In additive manufacturing, infill structures are commonly used to reduce the weight and cost of a solid part. Currently, most infill structure generation methods are based on the conventional 2.5-axis printing configuration, which, although…