Related papers: Nb$_3$Sn Films Exhibiting Continuous Supercurrent …
In this work, microwave measurements carried out in dielectric-loaded resonators exposed to high magnetic fields are exploited to yield the surface impedance of Nb$_3$Sn superconducting coatings deposited via two different techniques: vapor…
Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for…
We deposited Nb3Sn film on the inner surface of a 2.6 GHz Nb superconducting radiofrequency (SRF) cavity by co-sputtering using a composite of Nb and Sn tube targets in a DC cylindrical magnetron sputtering system, followed by thermal…
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 {\deg}C. The multilayers were then annealed inside a separate vacuum furnace at 950 {\deg}C for 3h. The…
Superconducting Nb3Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn…
Nb$_3$Sn is a promising advanced material under development for superconducting radiofrequency (SRF) cavities. Past efforts have been focused primarily on small development-scale cavities, but large, often multi-celled cavities, are needed…
We present an analysis of the Nb3Sn surface layers grown on a bulk niobium (Nb) coupon prepared at the same time and by the same vapor diffusion process used to make Nb3Sn coatings on 1.3 GHz cavities. Tunneling spectroscopy reveals a…
We report on atomic-scale analyses of grain boundary (GB) structures and segregation in Nb3Sn coatings on Nb, prepared by the vapor-diffusion process, for superconducting radiofrequency (SRF) cavity applications, utilizing atom-probe…
The mechanical vulnerability of the Nb3Sn-coated cavities is identified as one of the significant technical hurdles toward deploying them in practical accelerator applications in the not-so-distant future. It is crucial to characterize the…
A DC cylindrical magnetron sputtering system has been commissioned and operated to deposit Nb3Sn onto 2.6 GHz Nb SRF cavities. After optimizing the deposition conditions in a mock-up cavity, Nb-Sn films are deposited first on flat samples…
The penetration of magnetic flux into a thin superconducting film of Nb3Sn with critical temperature 17.8K and critical current density 6MA/cm^2 was visualized using magneto-optical imaging. Below 8 K an avalanche-like flux penetration in…
A15 superconductors are distinguished by their high critical temperatures, magnetic fields, and current-carrying capabilities. Among them, Nb$_3$Al is of particular interest for superconducting quantum circuits as a means to extend device…
Nb3Sn has the potential to achieve superior performance in terms of quality factor, accelerating gradient and operating temperature (4.2 K vs 2 K) resulting in significant reduction in both capital and operating costs compared to…
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system…
We use a near-field magnetic microwave microscope to investigate and compare rf vortex nucleation in two superconducting radio-frequency (SRF)-quality Nb3Sn films fabricated by different methods: a conventional vapor-diffused film and an…
While Nb3Sn theoretically offers better superconducting RF cavity performance (Q0 and Eacc) to Nb at any given temperature, peak RF magnetic fields consistently fall short of the 400 mT prediction. The relatively rough topography of…
We report an atomic-scale analysis of the microstructure of Nb3Sn coating on Nb prepared by vapor diffusion process for superconducting radiofrequency (SRF) cavity application using transmission electron microscopy (TEM). Epitaxial growth…
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and…
The present study delves into exploring the impact of a thin protective layer of scandium nitride (ScN) on the superconductive properties of thin films of niobium nitride (NbN) generated through reactive magnetron deposition. This is the…
Using a single coil mutual inductance technique, we measure the low temperature dependence of the magnetic penetration depth in superconducting NbN films prepared with similar critical temperatures around 16 K but with different…