Related papers: Lasing from a Quantum-Dot-Like Buried Heterostruct…
Erbium-doped lithium niobate high-Q microdisk cavities were fabricated in batches by UV exposure, inductively coupled plasma reactive ion etching and chemo-mechanical polishing. The stimulated emission at 1531.6 nm was observed under the…
One of the main applications of the bound state in the continuum (BIC) is the low-threshold lasing. Ideally, the infinite quality factor of the BIC results in the zero-threshold and zero-linewidth lasing. However, various effects disturb…
In this paper, we study the internal quantum efficiency and lasing threshold of AlGaN/GaN separate confinement heterostructures designed for ultraviolet laser emission. We discuss the effect of carrier localization and carrier diffusion on…
We report on the lasing action of atmospheric air pumped by an 800 nm femtosecond laser pulse with peak power up to 4 TW. Lasing emission at 428 nm increases rapidly over a small range of pump laser power, followed by saturation above ~ 1.5…
We present detailed experimental and numerical studies of random lasing in weakly scattering systems. The interference of scattered light, which is weak in the passive systems, is greatly enhanced in the presence of high gain, providing…
We show from ab initio laser theory that by choosing an appropriate spatial pump profile, many different spatial modes of a typical microlaser can be turned on at the same pump energy, substantially increasing the number, N, of simultaneous…
The buffer carbon layer obtained in the first instance by evaporation of Si from the Si-rich surfaces of silicon carbide (SiC) is often studied only as the intermediate to the synthesis of SiC supported graphene. In this work, we explore…
The results of computer simulations of light scattering by a random array of small particles is presented. Results are given for arrays of particles situated randomly in a cubic, 3D sample $1.6\mu$ on a side with particle numbers ranging…
Polymer micro- and nano-fibers, made of organic light-emitting materials with optical gain, show interesting lasing properties. Fibers with diameters from few tens of nm to few microns can be fabricated by electrospinning, a method based on…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Interface roughness scattering is an important limiting factor for achieving high performance Quantum Cascade Lasers. Following recent results, we study the growth conditions for a strain-compensated QCL emitting around 4.6 {\mu}m grown on…
This study presents a comprehensive numerical analysis of a quantum-dot-engineered heterostructure, PbS:$Yb^{3+},Er^{3+}$/CuBiO, optimized for water splitting applications. Using density functional theory (DFT) coupled with machine…
Monolithically combining silicon nitride (SiNx) photonics technology with III-V active devices could open a broad range of on-chip applications spanning a wide wavelength range of ~400-4000 nm. With the development of nitride, arsenide, and…
We introduce a novel light-matter interface that integrates a nanoscale buried heterostructure emitter into a dielectric bowtie cavity, co-localising the optical hotspot and the electronic wavefunction. This platform enables strong…
In this paper, we describe the growth and characterization of 530-nm-thick superlattices (100 periods) of AlxGa1-xN/AlN (x = 0, 0.1) Stranski-Krastanov quantum dots for application as the active region of electron-beam pumped ultraviolet…
Solution-based perovskite nanoparticles have been intensively studied in past few years due to their applications in both photovoltaic and optoelectronic devices. Here, based on the common ground between the solution-based perovskite and…
A new kind of mechanism of lasing is investigated experimentally. It is quite different from the traditional laser with cavity and the random laser with random scattering. In this mechanism, the intensity-dependent refractive index effect…
Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional…
Achieving device-to-device reproducibility is a critical bottleneck for scalable photonic integrated circuits, as subtle variations in bottom-up epitaxial growth and fabrication severely limit yield. We present a machine learning workflow…
Plasmonic lasers provide a paradigm-changing approach for the generation of coherent light at the nanoscale. In addition to the usual properties of coherent radiation, the emission of plasmonic lasers can feature high sensitivity to the…