Related papers: Temperature-insensitive tunable and stable Fabry-P…
We propose to take advantage of the properties of long Josephson junctions to realize a frequency variable Fabry-Perot Filter that operates in the range 100-500 GHz with a bandwidth below 1 GHz. In fact, we show that it is possible to…
We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to…
When illuminated by a white light source, the discrete resonances of a Fabry-Perot interferometer (FP) provide a broad bandwidth, comb-like spectrum useful for frequency calibration. We report on the design, construction and laboratory…
We present an in-vacuum bonded, 9.7 mL-volume Fabry-P\'erot ultrastable optical reference cavity that operates without a vacuum enclosure. A laser stabilized to the cavity demonstrates low, thermal noise-limited phase noise and 5x10^{-14}…
We present a first experimental characterization of our ultra-compact, ultra-stable laser. The heart of the apparatus is an original Fabry-Perot cavity with a 25 mm length and a pyramidal geometry, equipped with highly-reflective…
We experimentally study the interaction between a cold atom cloud and many longitudinal modes of a high quality Fabry-Perot cavity, by measuring signatures of collective light shifts in the cavity transmission spectrum of an optical…
We demonstrate a new feedback algorithm to cool a single neutral atom trapped inside a standing-wave optical cavity. The algorithm is based on parametric modulation of the confining potential at twice the natural oscillation frequency of…
We investigated the opto-mechanical properties of a Fabry-Perot cavity with a mirror mounted on a spring. Such a structure allows the cavity length to change elastically under the effect of light induced forces. This opto-mechanical…
Open-access optical microcavities are Fabry-Perot type cavities consisting of two micrometer-size mirrors, separated by an air (or vacuum) gap typically of a few micrometers. Compared to integrated microcavities, this configuration is more…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
We demonstrate spectrally-tunable Fabry-Perot bandpass filters operating across the MWIR by utilizing the phase-change material GeSbTe (GST) as a tunable cavity medium between two (Ge:Si) distributed Bragg reflectors. The induced refractive…
The achievable instrument sensitivity is a critical parameter for the continued development of THz applications. Techniques such as Cavity-Enhanced Techniques and Cavity Ring Down Spectroscopy have not yet been employed at THz frequency due…
Parity-time (PT) symmetric optical sensors operating around exceptional points have recently gained much attraction, offering an unparalleled high sensitivity in measuring small perturbations. In the past, most of the PT-symmetric sensors…
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably,…
We present a design for an ultra-stable cryogenically cooled sapphire optical cavity system, with fractional frequency stability better than 1 x 10^-16 at one second integration time. We plan to use such ultra-stable cavities to perform a…
Optical nanofiber cavity research has mainly focused on the fundamental mode. Here, a Fabry-P\'erot fiber cavity with an optical nanofiber supporting the higher-order modes, TE01, TM01, HE21o, and HE21e, is demonstrated. Using cavity…
The optical fiber Fabry-Perot interferometer (FPI) has been widely investigated as a potential temperature sensor. To function as a temperature sensor, the cavity of the FPI is typically constructed from either silica fibers or polymers.…
We present a detailed study of the use of Fabry-Perot (FP) cavities for the spectroscopy of single InAs quantum dots (QDs). We derive optimal cavity characteristics and resolution limits, and measure photoluminescence linewidths as low as…
We study the cavity mode frequencies of a Fabry-P\'erot cavity containing two vibrating dielectric membranes. We derive the equations for the mode resonances and provide approximate analytical solutions for them as a function of the…
Large Fabry-Perot Interferometers are used in a variety of astronomical instrumentation, including spectro-polarimeters for 4-meter class solar telescopes. In this work we comprehensively characterize the cavity of a prototype 150 mm…