Related papers: Corrosion Evolution of T91 Steel in Static Lead-Bi…
T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700{\deg}C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified…
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at…
The impedance behavior of pre-oxidized iron in liquid lead-bismuth eutectic (LBE) at 200 oC is studied using electrochemical impedance spectroscopy. The structures and resistance of oxide grown on iron oxidized in air at different…
A phase-field model is developed to simulate intergranular corrosion of ferritic/martensitic steels exposed to liquid lithium. The chromium concentration of the material is used to track the mass transport within the metal and liquid…
When a crystalline solid such as iron is cooled across a structural transition, its final microstructure depends sensitively on the cooling rate. For instance, an adiabatic cooling across the transition results in an equilibrium `ferrite',…
Understanding the non-equilibrium behavior of stainless steel under extreme electronic excitation remains a critical challenge for laser processing and radiation science. We employ a hybrid framework integrating density-functional tight…
We investigate the impact of the oxidizing character of the nitric medium on the evolution of the intergranular corrosion of a stainless steel. In two different oxidizing conditions ("severe" and "soft"), the corroded surface of the steel…
Corrosion of Indian RAFMS (reduced activation ferritic martensitic steel) material with liquid metal, Lead Lithium ( Pb-Li) has been studied under static condition, maintaining Pb-Li at 550 C for different time durations, 2500, 5000 and…
In the prevalent picture of ultrafast structural phase transitions, the atomic motion occurs in a slowly varying potential energy surface determined adiabatically by the fast electrons. However, this ignores non-conservative forces caused…
Long-term corrosion of glass is studied using polarising light microscopy, FTIR and SEM including EDX and elemental mapping. Early 19th century beads made of lead-potassium glass are the object of the study. Non-uniformly distributed…
A variety of polymeric surfaces, such as anti-corrosion coatings and polymer-modified asphalts, are prone to blistering when exposed to moisture and air. As water and oxygen diffuse through the material, dissolved species are produced,…
A rapid fracture test in four-point bending is proposed to assess hydrogen embrittlement (HE) susceptibility of high strength martensitic steels. The novelty of this technique is the rapid rate of loading, whereas conventional approaches…
Transition-metal dichalcogenide IrTe2 has attracted attention because of striped lattice, charge ordering and superconductivity. We have investigated the surface structure of IrTe2, using low energy electron diffraction (LEED) and scanning…
The kinetics of phase transformations at cooling of carbon steel in dependence on the temperature of preliminary annealing T$_{an}$ is studied. It is shown that the cooling from T$_{an}$ > A$_3$ (i. e. above the temperature of ferrite…
Despite of the appearance of numerous new materials, the iron based alloys and steels continue to play an essential role in modern technology. The properties of a steel are determined by its structural state (ferrite, cementite, pearlite,…
A carbon corrosion model is developed based on the formation of surface oxides on carbon and platinum of the polymer electrolyte membrane fuel cell electrode. The model predicts the rate of carbon corrosion under potential hold and…
Corrosion in concrete prevents in-situ observation, necessitating models to provide insight into the local reaction currents. We present a computational method for predicting corrosion rates of reinforcements within concrete under natural…
Laboratory and numerical corrosion experiments impose an electric potential on the metal surface, differing from natural corrosion conditions, where corrosion typically occurs in the absence of external current sources. In this work, we…
The corrosion property of Nickel-titanium (NiTi) shape memory alloy is investigated during forward martensitic transformation between 40C and 0C. The Differential Scanning Calorimetry technique is used to find the forward and reverse…
U$_3$Si$_2$ nuclear fuel is corroded in deuterated steam with in situ neutron diffraction. Density functional theory is coupled with rigorous thermodynamic description of the hydride including gas/solid entropy contributions. H absorbs in…