Related papers: ViPer NL-COMM: Making Vector Perturbation Precodin…
Massive MIMO is a variant of multiuser MIMO where the number of base-station antennas $M$ is very large (typically 100), and generally much larger than the number of spatially multiplexed data streams (typically 10). Unfortunately, the…
A sequential fronthaul network, referred to as radio stripes, is a promising fronthaul topology of cell-free MIMO systems. In this setup, a single cable suffices to connect access points (APs) to a central processor (CP). Thus, radio…
This paper studies the instantaneous rate maximization and the weighted sum delay minimization problems over a K-user multicast channel, where multiple antennas are available at the transmitter as well as at all the receivers. Motivated by…
The hybrid analog/digital architecture that connects a limited number of RF chains to multiple antennas through phase shifters could effectively address the energy consumption issues in massive multiple-input multiple-output (MIMO) systems.…
Although Multimodal Large Language Models (MLLMs) have demonstrated promising versatile capabilities, their performance is still inferior to specialized models on downstream tasks, which makes adaptation necessary to enhance their utility.…
The throughput of users with poor channel conditions, such as those at a cell edge, is a bottleneck in wireless systems. A major part of the power budget must be allocated to serve these users in guaranteeing their quality-of-service (QoS)…
In the conventional multiuser MIMO systems, user selection and scheduling has previously been used as an effective way to increase the sum rate performance of the system. However, the recent concepts of the massive MIMO systems (at…
We consider Gaussian multiple-input multiple-output (MIMO) channels with discrete input alphabets. We propose a non-diagonal precoder based on the X-Codes in \cite{Xcodes_paper} to increase the mutual information. The MIMO channel is…
To leverage high-frequency bands in 6G wireless systems and beyond, employing massive multiple-input multipleoutput (MIMO) arrays at the transmitter and/or receiver side is crucial. To mitigate the power consumption and hardware complexity…
Millimeter-wave (mmWave) multiple-input multiple-out (MIMO) systems relying on lens antenna arrays are capable of achieving a high antenna-gain at a considerably reduced number of radio frequency (RF) chains via beam selection. However, the…
As a key enabling technology for 5G wireless, millimeter wave (mmWave) communication motivates the utilization of large-scale antenna arrays for achieving highly directional beamforming. However, the high cost and power consumption of RF…
Large language models (LLMs) are typically served from clusters of GPUs/NPUs that consist of large number of devices. Unfortunately, communication between these devices incurs significant overhead, increasing the inference latency and cost…
The use of low-resolution digital-to-analog converters (DACs) for transmit precoding provides crucial energy efficiency advantage for massive multiple-input multiple-output (MIMO) implementation. This paper formulates a quadrature amplitude…
In millimeter wave (mmWave) systems, antenna architecture limitations make it difficult to apply conventional fully digital precoding techniques but call for low cost analog radio-frequency (RF) and digital baseband hybrid precoding…
We investigate the optimal power allocation and optimal precoding for a cluster of two BSs which cooperate to jointly maximize the achievable rate for two users connecting to each BS in a MCP framework. This framework is modeled by a…
A wireless massive MIMO system entails a large number (tens or hundreds) of base station antennas serving a much smaller number of users, with large gains in spectral-efficiency and energy-efficiency compared with conventional MIMO…
Modern 5G wireless cellular networks use massive multiple-input multiple-output (MIMO) technology. This concept entails using an antenna array at a base station to concurrently service many mobile devices that have several antennas on their…
Zero-forcing (ZF) precoding plays an important role for massive MIMO downlink due to its near optimal performance. However, the high computation cost of the involved matrix inversion hinders its application. In this paper, we adopt the…
The sum-rate of the broadcast channel in a multi-antenna multi-user communication system can be achieved by using precoding and adding a regular perturbation to the data vector. The perturbation can be removed by the modulus function, thus…
We study the multi-user massive multiple-input-single-output (MISO) and focus on the downlink systems where the base station (BS) employs hybrid analog-digital precoding with low-cost 1-bit digital-to-analog converters (DACs). In this…