Related papers: Fermilab PIP II machine protection system digitize…

Phase noise (PN) is a critical impairment at D-band frequencies (110 to 170 GHz), which are widely investigated as promising candidates for beyond 5G/6G ISAC systems. This paper evaluates OFDM based ISAC sensing performance under realistic…

The Proton Improvement Plan - II (PIP-II) is a new linear accelerator (LINAC) complex being built at Fermilab. It is based on superconducting radiofrequency cavities and will accelerate H- ions to 800 MeV kinetic energy before injection…

The closed-off structure of the Fermilab Drift Tube Linac precludes a robust array of instrumentation from directly monitoring the H- beam that is accelerated from 750 keV to 116 MeV. To improve beam tuning and operational assessment of…

A series of beam dynamic studies were performed in 2020-2021 at the PIP-II Injector Test Facility (PIP2IT) that has been built to validate the concept of the front-end of the PIP-II linac being constructed at Fermilab. PIP2IT is comprised…

We apply in simulation a reservoir computer based on evanescently coupled GaAs microrings for real-time compensation of a nonlinear distortion of a 50 Gbaud 16-QAM signal with the launch power up to 12 dBm in a standard single-mode optical…

Fermilab carries out an extensive program of accelerator-based high energy particle physics research at the Intensity Frontier that relies on the operation of 8 GeV and 120 GeV proton beamlines for a number of fixed target experiments.…

Practical systems often suffer from hardware impairments that already appear during signal generation. Despite the limiting effect of such input-noise impairments on signal processing systems, they are routinely ignored in the literature.…

Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit fidelity of operation. Here, we…

Over the past decade, Fermilab has focused efforts on the intensity frontier physics and is committed to increase the average beam power delivered to the neutrino and muon programs substantially. Many upgrades to the existing injector…

This work introduces an economic solution for the problems of sound insulation of recording studios. Sound insulation at wall resonance frequency is weak. Instead of acoustical treatment, a digital filter is used to eliminate the effects of…

Noise reduction techniques based on deep learning have demonstrated impressive performance in enhancing the overall quality of recorded speech. While these approaches are highly performant, their application in audio engineering can be…

The sensitivity of LISA depends on the suppression of several noise sources; dominant one is laser frequency noise. It has been shown that the six Doppler data streams obtained from three space-crafts can be appropriately time delayed and…

The Main Injector (MI) was commissioned using data acquisition systems developed for the Fermilab Main Ring in the 1980s. New VME-based instrumentation was commissioned in 2006 for beam loss monitors (BLM)[2], which provided a more…

In this paper we extend our investigations on noise-assisted storage devices through the experimental study of a loop composed of a single Schmitt trigger and an element that introduces a finite delay. We show that such a system allows the…

Laser phase noise remains a limiting factor in many experimental settings, including metrology, time-keeping, as well as quantum optics. Hitherto this issue was addressed at low frequencies, ranging from well below 1 Hz to maximally 100…

Hybrid systems consisting of different types of qubits are promising for building quantum computers if they combine useful properties of their constituent qubits. However, they also pose additional challenges if one type of qubits is more…

In recent years, quantum Ising machines have drawn a lot of attention, but due to physical implementation constraints, it has been difficult to achieve dense coupling, such as full coupling with sufficient spins to handle practical…

A new beam injection scheme is proposed for the Fermilab Booster to increase beam brightness. The beam is injected on the deceleration part of the sinusoidal magnetic ramp and capture is started immediately after the injection. During the…

Passive intermodulation (PIM) has emerged as a critical source of self-interference in modern MIMO-OFDM systems, especially under the stringent requirements of 5G and beyond. Conventional cancellation methods often rely on complex nonlinear…

Analog Programmable-Photonic Computation (APC) leverages programmable integrated photonics (PIP) to perform high-speed matrix operations using optical waves. However, the continuous nature of optical waves that implement the analog bits or…