Related papers: Accelerating TTL noise post-processing via combine…

Tilt-to-length (TTL) coupling, caused by the jitter of test masses or satellites, is a significant noise source in space-based gravitational wave detection. Calibrating and suppressing TTL coupling noise at the sub-nanometer level is…

LISA will detect gravitational waves (GWs) in the milli-Hz frequency band in space. Time-delay interferometry (TDI) is developed to suppress laser frequency noise beneath the acceleration noise and optical metrology noise. To identify…

Time-delay interferometry (TDI) is essential for space-based gravitational wave (GW) missions to effectively suppress laser frequency noise and achieve targeting sensitivity. The principle of the TDI is to synthesize multiple laser link…

Pointing-related displacement noises are crucial in space-based gravitational wave detectors, where point-ahead angle control of transmitted laser beams may contribute significantly. For TianQin that features a geocentric concept, the…

The future space-based gravitational wave observatory LISA will consist of a constellation of three spacecraft in a triangular constellation, connected by laser interferometers with 2.5 million-kilometer arms. Among other challenges, the…

The space-based gravitational-wave observatory LISA, a NASA-ESA mission to be launched after 2012, will achieve its optimal sensitivity using Time Delay Interferometry (TDI), a LISA-specific technique needed to cancel the otherwise…

The LISA mission will likely be a signal dominated detector, such that one challenge is the separation of the different astrophysical sources, and to distinguish between them and the instrumental noise. One of the goals of LISA is to probe…

The aim of the Laser Interferometer Space Antenna (LISA) is to detect gravitational waves through a phase modulation in long (2.5 Mkm) laser light links between spacecraft. Among other noise sources to be addressed are the phase…

The Laser Interferometer Space Antenna (LISA) is a European Space Agency mission that aims to measure gravitational waves in the millihertz range. Laser frequency noise enters the interferometric measurements and dominates the expected…

Tilt-to-length coupling was the limiting noise source in LISA Pathfinder between 20 and 200 mHz before subtraction in post-processing. To prevent the adding of sensing noise to the data by the subtraction process, the success of this…

We present a study of the tilt-to-length coupling noise during the LISA Pathfinder mission and how it depended on the system's alignment. Tilt-to-length coupling noise is the unwanted coupling of angular and lateral spacecraft or test mass…

In this paper we present a data analysis approach applicable to the potential saddle-point fly-by mission extension of LISA Pathfinder (LPF). At the peak of its sensitivity, LPF will sample the gravitational field in our Solar System with a…

The proposed Laser Interferometer Space Antenna (LISA) mission is tasked with the detection and characterization of gravitational waves from various sources in the universe. This endeavor is challenged by transient displacement and…

Impulsive noise poses a significant challenge to the reliability of wireless communication systems, necessitating accurate estimation of its statistical parameters for effective mitigation. This paper introduces a multitask learning (MTL)…

Gravitational waves (GWs) from tens of millions of compact binaries in our Milky Way enter the milli-Hertz band of space-based detection. The majority of them cannot be resolved individually, resulting in a foreground confusion noise for…

Time delay interferometry (TDI) is a post-processing technique used in the Laser Interferometer Space Antenna (LISA) to reduce laser frequency noise by building an equal-arm interferometer via combining time-shifted raw phase measurements.…

Time-delay interferometry (TDI) is essential for suppressing laser frequency noise in space-based gravitational wave (GW) observatories such as LISA. However, current second-generation TDI schemes often exhibit undesirable null frequencies…

Space-based gravitational wave (GW) detectors are designed for wave sources in the millihertz band with different locations and orientations. Time-delay interferometry (TDI) technique is an indispensable ingredient in space-borne GW…

During the On-Station Thermal Test campaign of the LISA Pathfinder the data and diagnostics subsystem was tested in nearly space conditions for the first time after integration in the satellite. The results showed the compliance of the…

Laser frequency noise (LFN) is the dominant source of noise expected in the Laser Interferometer Space Antenna (LISA) mission, at $\sim$7 orders of magnitude greater than the typical signal expected from gravitational waves (GWs).…