Related papers: On-Chip Erbium-Doped Tantalum Oxide Microring Hybr…
We report an on-chip single mode microlaser with low-threshold fabricated on Erbium doped lithium niobate on insulator (LNOI). The single mode laser emission at 1550.5 nm wavelength is generated in a coupled photonic molecule, which is…
Erbium-doped lithium niobate on insulator (Er:LNOI) is a promising platform for photonic integrated circuits as it adds gain to the LNOI system and enables on-chip lasers and amplifiers. A challenge for Er:LNOI laser is to increase its…
The erbium-doped Lithium niobate on insulator (Er:LNOI) platform has great promise in the application of telecommunication, microwave photonics, and quantum photonics due to its excellent electro-optic, piezo-electric, nonlinear nature as…
Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a…
Tantalum pentoxide (Ta2O5), as a silicon-photonic-compatible material platform, has garnered significant attention for high-performance integrated photonics due to its exceptional properties: a broad transparency window spanning from 0.28…
Microcavity lasers based on erbium-doped lithium niobate on insulator (LNOI), which are key devices for LNOI integrated photonics, have attracted much attention recently. In this Letter, we report the realization of a C-band single-mode…
Hybrid integrated diode lasers have so far been realized using silicon, polymer, and silicon nitride (Si3N4) waveguide platforms for extending on-chip tunable light engines from the infrared throughout the visible range. Here we demonstrate…
Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large-scale sensing. Subject to…
Light source is indispensable component in on-chip system. Compared with hybrid or heterogeneous integrated laser, monolithically integrated laser is more suitable for high density photonic integrated circuit (PIC) since the capability of…
We demonstrate single-mode microdisk lasers in the telecom band with ultra-low thresholds on erbium-ytterbium co-doped thin-film lithium niobate (TFLN). The active microdisk were fabricated with high-Q factors by photo-lithography assisted…
We demonstrate monolithic integration of an electro-optically (EO) tunable microring laser on lithium niobate on insulator (LNOI) platform. The device is fabricated by photolithography assisted chemo-mechanical etching (PLACE), and the pump…
Efficient coupling of single quantum emitters to guided optical modes of integrated optical devices is of high importance for applications in quantum information science as well as in the field of sensing. Here we present the design and…
Realizing scalable quantum interconnects necessitates the integration of solid-state quantum memories with foundry photonics processes. While prior photonic integration efforts have relied upon specialized, laboratory-scale fabrication…
Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…
We demonstrate a hybrid integrated and widely tunable diode laser with an intrinsic linewidth as narrow as 40 Hz, achieved with a single roundtrip through a low-loss feedback circuit that extends the cavity length to 0.5 meter on a chip.…
Erbium-based materials have long been recognized for their important telecom-band applications, yet their widespread adoption in integrated optoelectronics has been hindered by two fundamental limitations: the difficulty in achieving high…
A silicon light source at communication wavelength is the bottleneck for developing monolithically integrated silicon photonics. Doping silicon with erbium ions was believed to be one of the most promising approaches but suffers from the…
Erbium-doped lithium niobate high-Q microdisk cavities were fabricated in batches by UV exposure, inductively coupled plasma reactive ion etching and chemo-mechanical polishing. The stimulated emission at 1531.6 nm was observed under the…
Integrated on-chip microdisk lasers have attracted great attention as a light source of compact size, low lasing threshold and narrow bandwidth. However, challenges remain unresolved in terms of single mode operation at high output power…
We overcome the difficulty in realizing a monolithic waveguide-coupled microring laser integrated on erbium-doped thin film lithium niobate (Er: TFLN) using photolithography assisted chemo-mechanical etching (PLACE) technique. We…