Related papers: Carrier-Envelope-Offset Frequency Stabilization of…
We present a carrier-envelope offset (CEO) stable ytterbium-doped fiber chirped-pulse amplification system employing the technology of coherent beam combining and delivering more than 1 kW of average power at a pulse repetition rate of 80…
A compact Kerr-lens mode-locked thin-disk oscillator delivering 110 MW output peak power, the highest among all oscillators, is reported. A pulse train with a repetition rate of 14 MHz carries 115 fs long, 14.4 uJ pulses resulting in 202 W…
The measurement and stabilization of the carrier-envelope offset frequency $f_{\textrm{CEO}}$ via self-referencing is paramount for optical frequency comb generation which has revolutionized precision frequency metrology, spectroscopy, and…
Carrier-envelope phase stabilization of optical pulses enables exquisitely precise measurements by way of direct optical-frequency synthesis, absolute optical-to-microwave phase conversion, and control of ultrafast waveforms. We report such…
We report on the dependence of the frequency-to-intensity noise conversion in the locking of an ultrafast laser against a high-finesse optical resonator from the Carrier Envelope Offset (CEO) frequency. By a proper combination of the cavity…
We demonstrate an active carrier-envelope phase (CEP) stabilization scheme for optical waveforms generated by difference-frequency mixing of two spectrally detuned and phase-correlated pulses. By performing ellipsometry with spectrally…
Controlling the carrier envelope phase (CEP) in mode-locked lasers over practically long timescales is crucial for real-world applications in ultrafast optics and precision metrology. We present a hybrid solution that combines a…
We propose a scheme to generate carrier-envelope-phase (CEP) stabilized few-cycle optical pulses from a free-electron laser oscillator. The CEP stabilization is realized by continuous injection of CEP-stabilized seed pulses from an external…
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic…
Optical frequency comb (OFC) technology has been the cornerstone for scientific breakthroughs such as precision frequency metrology, redefinition of time, extreme light-matter interaction, and attosecond sciences. While the current…
We investigated the carrier-envelope phase (CEP) stability of a hollow-fiber setup used for high-energy, few-cycle pulse generation. Saturation of the output pulse energy is observed at 0.6 mJ for a 260 um inner-diameter, 1 m long fiber,…
The stabilization of lasers to absolute frequency references is a fundamental requirement in several areas of atomic, molecular and optical physics. A range of techniques are available to produce a suitable reference onto which one can…
We present a 1.75-GHz self-referenceable frequency comb from a vertical external-cavity surface-emitting laser (VECSEL) passively modelocked with a semiconductor saturable absorber mirror (SESAM). The VECSEL delivers 231-fs pulses with an…
We demonstrate the use of a flexible digital servo system for the optical stabilization of both the repetition rate and carrier-envelope offset frequency of a laser frequency comb. The servo system is based entirely on a low-cost field…
In this letter, we experimentally demonstrate low noise 300GHz wave generation based on a Kerr microresonator frequency comb operating in soliton regime. The spectral purity of a 10GHz GPS-disciplined dielectric resonant oscillator is…
The repetition rate stabilization of an optical frequency comb based on diode-pumped solid-state laser technology is demonstrated using an intra-cavity electro-optic modulator. The large feedback bandwidth of such modulators allows…
We theoretically analyze the noise transformation of a high power continuouswave light field that is reflected off a critical Kerr non-linear cavity (KNLC). Our investigations are based on a rigorous treatment in the time-domain. Thereby,…
We describe the design and operation of a high-stability Fabry-Perot cavity, for laser stabilization in cavity quantum-electrodynamics experiments. Our design is based on an inexpensive and readily available uniaxial carbon-fiber reinforced…
Few-cycle pulsed laser technology highlights the need for control and stabilization of the carrier-envelope phase (CEP) for applications requiring shot-to-shot timing and phase consistency. This general requirement has been achieved…
This paper shows the experimental details of the stabilization scheme that allows full control of the repetition rate and the carrier-envelope offset frequency of a 10 GHz frequency comb based on a femtosecond Ti:sapphire laser.…