Related papers: Low-complexity spectral shaping method for OFDM si…
Orthogonal frequency division multiplexing (OFDM) signals with rectangularly windowed pulses exhibit low spectral confinement. Two approaches usually referred to as pulse-shaping and active interference cancellation (AIC) are classically…
Orthogonal frequency division multiplexing (OFDM) is a widespread modulation but suffers from high out-of-band emissions (OOBE). Spectral shaping strategies such as precoding, active interference cancellation (AIC) and time-domain methods…
Circularly pulse-shaped orthogonal frequency division multiplexing (CPS-OFDM) is one of the most promising 5G waveforms that addresses two physical layer signal requirements of low out-of-subband emission (OSBE) and low peak-to-average…
Orthogonal frequency division multiplexing (OFDM) has been widely adopted for modern wireless standards and become a key enabling technology for cognitive radios. However, one of its main drawbacks is significant spectral leakage due to the…
OFDM-based waveforms with filtering or windowing functionalities are considered key enablers for a flexible air-interface design for multi-service support in future 5G systems. One candidate from this category of waveforms is pulse shaped…
A new circularly pulse-shaped (CPS) precoding orthogonal frequency division multiplexing (OFDM) waveform, or CPS-OFDM for short, is proposed in this paper. CPS-OFDM, characterized by user-specific precoder flexibility, possesses the…
Orthogonal delay-Doppler (DD) division multiplexing (ODDM) modulation has recently emerged as a promising paradigm for ensuring reliable communications in doubly-selective channels. This work investigates the spectra and orthogonality…
Orthogonal Frequency Division Multiplexing (OFDM) is an attractive modulation and multiple access techniques for channels with a nonflat frequency response, as it saves the need for complex equalizers. It can offer high quality performance…
Optical orthogonal frequency-division multiplexing (OFDM) and probabilistic constellation shaping (PCS) have emerged as powerful techniques to enhance the performance of optical wireless communications (OWC) systems. While PCS improves…
Orthogonal Frequency Division Multiplexing (OFDM) is an efficient method of data transmission for high speed communication systems. However, the main drawback of OFDM system is the high Peak to Average Power Ratio (PAPR) of the transmitted…
With the emergence of new applications (e.g., extended reality and haptics), which require to be simultaneously served not just with low latency and sufficient reliability, but also with high spectral efficiency, future networks (i.e., 6G)…
Future wireless communication systems must simultaneously address multiple challenges to ensure accurate data detection, deliver high Quality of Service (QoS), adding enable a high data transmission with low system design. Additionally,…
Due to the flexibility in spectrum shaping, orthogonal frequency division multiplexing (OFDM) is a promising technique for dynamic spectrum access. However, the out-of-band (OOB) power radiation of OFDM introduces significant interference…
In orthogonal frequency division multiplexing with index modulation (OFDM-IM), the active subcarriers can convey information bits by modulated symbols as well as their indices. OFDM-IM has attracted a great deal of attention from…
This paper proposes a novel low probability of intercept (LPI) waveform design approach for orthogonal frequency-division multiplexing (OFDM)-based integrated sensing and communication systems by introducing artificial phase and Doppler…
Low peak-to-average power ratio (PAPR) orthogonal frequency division multiplexing (OFDM) waveform design is a crucial issue in integrated sensing and communications (ISAC). This paper introduces an OFDM-ISAC waveform design that utilizes…
Orthogonal time-frequency space (OTFS) modulation is a recently proposed waveform for efficient data transfer in high-speed vehicular scenarios. The use of rectangular pulse shape in OTFS results in high out of band (OoB) radiation, which…
Probabilistic shaping for intensity modulation and direct detection (IM/DD) links is discussed and a peak power constraint determined by the limited modulation extinction ratio (ER) of optical modulators is introduced. The input…
Orthogonal frequency division multiplexing (OFDM) signals have high peak-to-average power ratio (PAPR), which causes distortion when OFDM signal passes through a nonlinear high power amplifier (HPA). A partial transmit sequence (PTS) scheme…
The orthogonal frequency division multiplexing is a very efficient modulation technique that can achieve very high throughput by transmitting many carriers simultaneously and it is spectrally efficient because of the proximity of the…