Related papers: Modeling and Experiments of an Injection-Locked Ma…
The theoretical analysis and numerical simulations of the magnetron operation with a feedback loop were performed assuming that the delay of the electromagnetic wave propagating in the loop is constant whereas the phase of the complex…
A high-efficiency power-combining method for four-way 5.8-GHz magnetrons based on the external injection-locking technique is presented in this article. The method uses a nonisolated, lossless five-port hybrid waveguide combiner for power…
A concept of a high-power magnetron transmitter for operation within a wideband control feedback loop in phase and amplitude is presented. This transmitter is proposed to drive Superconducting RF (SRF) cavities for intensity-frontier…
Magnetrons are widely used as a high-efficiency, large-power, and low-cost microwave source. This article proposes a method to improve the magnetron output characteristics based on regulating its anode current by a novel active distortion…
Results of research are presented concerning operative modes of a high-voltage (relativistic) pulsed magnetron for the 8 mm wavelength range. Technical solutions are proposed for improving the output system of the device, such as to…
A concept for a two-stage injection-locked CW magnetron intended to drive Superconducting Cavities (SC) for intensity-frontier accelerators has been proposed. The concept considers two magnetrons in which the output power differs by 15-20…
A metallic ring based, diode-integrated, low-profile, power-dependent, reflective metasurface working from 3 GHz to 3.6 GHz is proposed in this letter. Unlike the previous study which shifts a band up and down to change the impedance of the…
A novel injection-locked S-band microwave oven magnetron system is proposed, analyzed, and experimented. The magnetron is considered as a two-port oscillator, and the filament structures of it are used as a port for injection locking. To…
A simplified analytical model based on the charge drift approximation has been developed. It considers the resonant interaction of the synchronous wave with the flow of Larmor electrons in a magnetron. The model predicts stable coherent…
A model of the CW high-power transmitter, utilizing frequency-locked magnetrons with a phase control studied initially as a prototype of controllable in phase and power an RF source for intensity-frontier superconducting linacs, was…
A simplified analytical model of the resonant interaction of the beam of Larmor electrons drifting in the crossed constant fields of a magnetron with a synchronous wave providing a phase grouping of the drifting charge was developed to…
The experimental evidence of purely reactive loads impedance matching is here provided by exploiting the special scattering response under complex excitations. The study starts with a theoretical analysis of the reflection properties of an…
Slow magnetic relaxation and two level fluctuations measurements under high current injection is performed in single-contacted ferromagnetic nanostructures. The magnetic configurations of the samples are described by two metastable states…
We studied the injection-locking properties of a resonant-tunneling-diode terahertz oscillator in the small-signal injection regime with a frequency-stabilized continuous THz wave. The linewidth of the emission spectrum dramatically…
Magnetrons are widely used as high-performance microwave sources in microwave heating, microwave chemistry, and microwave power transmission due to their high efficiency, low cost, and compact size advantages. However, the output power of a…
This work investigates the behavior of a spin-exchange relaxation-free (SERF) magnetometer integrated into the feedback branch of a closed-loop control circuit, designed to actively suppress noise from a current source. In this…
We demonstrate results of a simulation of nonlinear reflection of intensive terahertz radiation from a silicon-on-metal metasurface involving an excitation of a high-Q trapped mode resonance. Conditions are presented to observe effects of…
Optimizing sensor readout schemes and integrated circuit designs for both open-loop and closed-loop implementations requires precise modeling and simulation strategies. This study introduces a novel two-port impedance model to estimate the…
The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons. The ability…
To increase the power level and energy utilization rate of injection-locked magnetron sources, a dual way 1-kW S-band magnetron microwave power combining system with high combining efficiency was proposed and validated. A waveguide…