Related papers: The ORCA-TWIN qCMOS Project I. Commissioning at Ca…

Recent progress with CMOS detector development has opened new parameter space for high cadence time resolved imaging of transients and fast proper motion solar system objects. Using computer simulations for a ground-based 1.23 m telescope,…

Modern scientific CMOS cameras offer very fast readout speeds and low read noise. In this study, we evaluate the performance of the Andor Marana CMOS camera through on-sky testing carried out at the NGTS facility at the ESO Paranal…

CMOS detectors offer many advantages over CCDs for optical and UV astronomical applications, especially in space where high radiation tolerance is required. However, astronomical instruments are most often designed for low light-level…

HiPERCAM is a high-speed camera for the study of rapid variability in the Universe. The project is funded by a 3.5MEuro European Research Council Advanced Grant. HiPERCAM builds on the success of our previous instrument, ULTRACAM, with very…

Scientific CMOS image sensors are a modern alternative for a typical CCD detectors, as they offer both low read-out noise, large sensitive area, and high frame rates. All these makes them promising devices for a modern wide-field sky…

Modern scientific complementary metal-oxide semiconductor (sCMOS) detectors provide a highly competitive alternative to charge-coupled devices (CCDs), the latter of which have historically been dominant in optical imaging. sCMOS boast…

Scientific CMOS image sensors are a modern alternative for a typical CCD detectors, as they offer both low read-out noise, large sensitive area, and high frame rates. All these makes them promising devices for a modern wide-field sky…

Rapid Oscillations in the Solar Atmosphere (ROSA) is a synchronized, six camera high cadence solar imaging instrument developed by Queen's University Belfast. The system is available on the Dunn Solar Telescope at the National Solar…

We present a new automatic tool for time-domain astronomy - the Cambridge Photometric Calibration Server 2.0 - developed under OPTICON H2020 programme. It has been designed to respond to the need of automated rapid photometric data…

The broad energy response, low electronic read noise, and good energy resolution have made X-ray Charge-Coupled Devices (CCDs) an obvious choice for developing soft X-ray astronomical instruments over the last half century. They also come…

Time Projection Chambers equipped with Gas Electron Multipliers and optical readout by scientific CMOS cameras are a promising technology for low-energy particle detection, as demonstrated by the CYGNO experiment. To help identify the…

We describe the overall characteristics and the performance of an optical CCD camera system, Camera for QUasars in EArly uNiverse (CQUEAN), which is being used at the 2.1 m Otto Struve Telescope of the McDonald Observatory since 2010…

We have built and tested a compact, low-cost, but very-high-performance astronomical polarimeter based on a continuously rotating half-wave plate and a high-speed imaging detector. The polarimeter is suitable for small telescopes up to ~1 m…

The Teledyne COSMOS-66 is a next-generation CMOS camera designed for astronomical imaging, featuring a large-format sensor ($8120 \times 8120$ pixels, each $10 \mu m$), high quantum efficiency, high frame rates, and a correlated…

In recent years, there has been a gradual increase in the performance of Complementary Metal Oxide Semiconductor (CMOS) cameras. These cameras have gained popularity as a viable alternative to charge-coupled device (CCD) cameras in a wide…

We report the development of a high-time resolution, 3-colour, simultaneous optical imaging system for the 2.1 m telescope in San Pedro M\'artir Observatory, M\'exico. OPTICAM will be equipped with three Andor Zyla 4.2-Plus sCMOS cameras…

In recent years there appeared a need for astronomical observations timed with sub-millisecond accuracy. These include e.g. timing stellar occultations by small, sub-km or fast Near Earth Asteroids, but also tracking artificial satellites…

The Mini-SiTian project, which is the pathfinder for the SiTian project, utilizes three 30 cm telescopes equipped with commercial CMOS cameras (ZWO ASI6200MM Pro) to simulate large-area time-domain survey. Due to the avoidance of the…

OPTIMA is a small, versatile high-speed photometer which is primarily intended for time resolved observations of young high energy pulsars at optical wavelengths. The detector system consists of eight fiber fed photon counters based on…

The design and implementation of astronomical cameras based on the large-format CCD and CMOS detectors is described in this paper. The Dinacon-5 controller is used for work with the CCDs and to achieve high performance and low noise. A new…