Related papers: Single-step laser patterning and thinning of bioco…
A multimode microcavity sensor based on a self-interference microring resonator is demonstrated experimentally. The proposed multimode sensing method is implemented by recording wideband transmission spectra that consist of multiple…
Cryogenic characterization of transition-edge sensor (TES) bolometers is a time- and labor-intensive process. As new experiments deploy larger and larger arrays of TES bolometers, the testing process will become more of a bottleneck. Thus…
Biomonitoring wearable sensors based on two-dimensional nanomaterials have lately elicited keen research interest and potential for a new range of flexible nanoelectronic devices. Practical nanomaterial-based devices suited for real-world…
We have demonstrated the fabrication and characterization of 2D liquid-based multimode optical waveguide structures over a Polydimethylsiloxane (PDMS) material-based chip. Fabrication of two separate microstructures, one with a width of 14…
In recent years, the progress on low temperature detector technologies has allowed design of large scale experiments aiming at pushing down the sensitivity on the neutrino mass below 1\,eV. Even with outstanding performances in both energy…
We present mechanical measurements performed at low temperatures on cantilever-based microelectro-mechanicalstructures(MEMS) coated with a metallic layer. Two very different coatings are presented in order to illustrate the capabilities of…
We present a monolithic, microfabricated, metal-oxide semiconductor (MOS) sensor array in conjunction with a machine learning algorithm to determine unique fingerprints of individual gases within homogenous mixtures. The array comprises…
Microelectromechanical systems (MEMS) are currently supporting ground-breaking basic research in materials science and metallurgy as they allow in situ experiments on materials at the nanoscale within electron-microscopes in a wide variety…
We report on the status and development of polarization-sensitive detectors for millimeter-wave applications. The detectors are fabricated on single-crystal silicon, which functions as a low-loss dielectric substrate for the microwave…
An innovative path for the detectors at future colliders to achieve higher performances is to use a Particle Flow approach, which requires highly granular calorimeters to image individual showers. The silicon-tungsten electromagnetic…
Boosting the sensitivity of solid-state gas sensors by incorporating nanostructured materials as the active sensing element can be complicated by interfacial effects. Interfaces at nanoparticles, grains, or contacts may result in non-linear…
The advances in micro-size and in-plane supercapacitors lead to produce the miniaturizing energy storage devices in portable and bendable electronics. Micro-supercapacitors have unique electrochemical performance, such as high power…
Predicting the microstructure during selective laser sintering (SLS) is of great interests, which can compliment the current time and cost expensive trial-and-error principle with an efficient computational design tool. However, it still…
The study is devoted to development and optimization of a metasurface-based sensor with graphene constituents for potential biosensing applications. A unit cell of the proposed metasurface consists of a thin flexible dielectric substrate…
Aluminium based platforms have allowed to reach major milestones for superconducting quantum circuits. For the next generation of devices, materials that are able to maintain low microwave losses while providing new functionalities, such as…
Pinning magnetization in a ferromagnetic thin film is commonly realized through exchange biasing with an adjacent antiferromagnet. Field-cooling from above the N\'{e}el temperature is a reliable yet slow re-pinning method in exchange-biased…
Micropumps are one of the most important parts of a microfluidic system. In particular, for biomedical applications such as Lab-on-Chip systems, micropumps are used to transport and manipulate test fluids in a controlled manner. In this…
This work expands on our recently introduced low Mach enthalpy method [1] for simulating the melting and solidification of a phase change material (PCM) alongside (or without) an ambient gas phase. The method captures PCM's volume change…
Cryo-electron microscopy (cryo-EM) is a powerful technique in structural biology and drug discovery, enabling the study of biomolecules at high resolution. Significant advancements by structural biologists using cryo-EM have led to the…
In mesoscopic superconductor/normal-metal/superconductor (SNS) heterostructures, it is known that the resistance of the normal metal between the superconductors has a strong temperature dependence. Based on this phenomenon, we have…