Related papers: In-series Multimode Interference Sensors and Fabry…
We present the novel design of microfabricated, silicon-substrate based mirrors for use in cryogenic Fabry-Perot Interferometers (FPIs) for the mid-IR to sub-mm/mm wavelength regime. One side of the silicon substrate will have a…
Resolution investigation of multiplexed displacement sensors based on extrinsic fiber Fabry-Perot interferometers (EFPI) was carried out. The cases of serial and parallel configurations were considered, the analysis of the problems and the…
Ultrahigh-resolution fiber-optic sensing has been demonstrated with a meter-long, high-finesse fiber Fabry-Perot interferometer (FFPI). The main technical challenge of large, environment-induced resonance frequency drift is addressed by…
We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either…
We describe the recent modifications to the data reduction technique for observations acquired with the scanning Fabry-Perot interferometer (FPI) mounted on the 6-m telescope of the Special Astrophysical Observatory that allow the…
It is known that spectral properties of the Fabry - Perot interferometer (FPI) depend on the spatial characteristics of the incident radiation. This paper proposes a general method for taking this dependence into account, based on the…
In the present work a new model of a refractive index (RI) sensor is exhibited. This is based on a dual core micro-structured optical fiber (MOF), where two holes are introduced at the core centers. In this way, the model enhances the…
Hyperspectral imaging systems based on multiple-beam interference (MBI), such as Fabry-Perot interferometry, are attracting interest due to their compact design, high throughput, and fine resolution. Unlike dispersive devices, which measure…
Based on the interaction between different spatial modes, semiconductor Bragg-reflection waveguides provide a highly functional platform for non-linear optics. Therefore, the control and engineering of the properties of each spatial mode is…
A suspension-point interferometer (SPI) is an auxiliary interferometer for active vibration isolation, implemented at the suspension points of the mirrors of an interferometric gravitational wave detector. We constructed a prototype…
When light passes through a multimode fiber, two-dimensional random intensity patterns are formed due to the complex interference within the fiber. The extreme sensitivity of speckle patterns to the frequency of light paved the way for…
We explore self-induced parametric coupling, also called internal resonances (IRs), in a membrane nanoelectromechanical system. Specifically, we focus on the formation of a limit cycle manifesting as a phononic frequency comb. Utilizing a…
We introduce the concept of spatial and spectral control of nonlinear parametric sidebands in multimode optical fibers by tailoring their linear refractive index profile. In all cases, the pump experiences Kerr self-cleaning, leading to a…
Fabry-P\'erot interferometers (FPIs) have become very popular in solar observations because they offer a balance between cadence, spatial resolution, and spectral resolution through a careful design of the spectral sampling scheme according…
Pixel size in cameras and other refractive imaging devices is typically limited by the free-space diffraction. However, a vast majority of semiconductor-based detectors are based on materials with substantially high refractive index. We…
The rapid evolution of wearable technologies, such as AR glasses, demands compact, energy-efficient sensors capable of high-precision measurements in dynamic environments. Traditional Frequency-Modulated Continuous Wave (FMCW) Laser…
Optical frequency combs have attracted attention as optical frequency rulers due to their tooth-like discrete spectra together with their inherent mode-locking nature and phase-locking control to a frequency standard. Based on this concept,…
A multimode microcavity sensor based on a self-interference microring resonator is demonstrated experimentally. The proposed multimode sensing method is implemented by recording wideband transmission spectra that consist of multiple…
This paper, addressing the integration requirements of radar imaging and communication for High-Altitude Platform Stations (HAPs) platforms, designs a waveform based on linear frequency modulated (LFM) frequency-hopping signals that…
Optical spectroscopic sensors are powerful tools for analysing gas mixtures in industrial and scientific applications. Whilst highly sensitive spectrometers tend to have a large footprint, miniaturized optical devices usually lack…